Abstract:In the current work, the relationship between the microstructural evolution and strengthening mechanisms in a vanadium micro-alloyed high strength low alloy (HSLA) martensitic steel has been systematically investigated by multi-scale characterizations and modeling. Two heat treatment routes, i.e., solution quenching plus tempering (SQT) and solution quenching plus isothermal annealing (QIA) are applied to produce a martensitic matrix combined with considerable nano-scale MC-type carbides (M = V, Mo, Cr) in the experimental steels. Theoretic calculations of the strengthening contributions are conducted based on quantitative characterizations of microstructural parameters, the overall modeling results agree quite well with the experimental results for estimating yield strength of the specimens. Precipitation and dislocation strengthening are found to be the main factors causing strength evolution with different isothermal holding time (IHT) at 600 degrees C. In both SQT and QIA specimens, the prolonged IHT contributes to an increased particle size and volume fraction of MC precipitates but a decreased dislocation density, and the most excellent mechanical properties are achieved with IHT of 2 h. The precipitation strengthening of SQT specimens is higher than that of QIA specimens because of its finer particle size and higher volume fraction of the MC precipitates, resulting in the higher yield strength of the SQT specimens than that of the QIA specimens. This can be explained by the hierarchy lath martensite that is highly dislocated with numerous interfaces, providing considerable nucleation points and high-speed atomic diffusion paths for precipitation, leading to the significantly refined MC particle size in the SQT specimens. Moreover, the MC precipitates exhibit no significantly coarsening during isothermal holding at 600 degrees C, which is a result of the presence of Mo/Cr atoms in MC precipitates that yields precipitate size stabilization due to its higher chemical potentials than that of V, thus maintaining a stable precipitation strengthening after IHT exceeding 2 h.

Effect of Ti/V Ratio on Thermodynamics and Kinetics of MC in Γ/α Matrices of Ti–V Microalloyed Steels

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Effect of Molybdenum Addition on the Precipitation of Carbides in the Austenite Matrix of Titanium Micro-Alloyed Steels

Effect of Precipitation of (ti,v)n and V(C,N) Secondary Phases on Mechanical Properties of V and N Microalloyed 1cr Steels

Influence of Ti and V on the Hot Ductility of High Manganese Austenitic Steel

Effect of Mn concentration on the kinetics of strain induced precipitation in Ti microalloyed steels

Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum

Effects of Ti and a Twice-Quenching Treatment on the Microstructure and Ductile Brittle Transition Temperature of 9crwvtin Steels

Role of Microalloying Elements on Recrystallization Kinetics of Cold-Rolled High Strength Low Alloy Steels

Comparative Study of VC, NbC, and TiC Interphase Precipitation in Microalloyed Low-carbon Steels

Dynamic precipitation and solute hardening in a titanium microalloyed steel containing three levels of manganese

Effect of Precipitation on the Mechanical Behavior of Vanadium Micro-Alloyed HSLA Steel Investigated by Microstructural Evolution and Strength Modeling

Quantitative analysis of precipitation and strengthening mechanisms of V and V-Ti hot-rolled microalloyed steels

Thermodynamic analysis on in-situ TiC synthesis in Fe-C-Ti-Mn system

Effects of solute alloying elements on solid solubility of TiC in austenite

Influence of V on the Microstructure and Precipitation Behavior of High-Carbon Hardline Steel during Continuous Cooling

Precipitation behavior of Ti–Nb–V–Mo quaternary microalloyed high strength fire-resistant steel and its influence on mechanical properties

MC precipitates affected by nitrogen addition in Ti-V-Nb micro-alloyed high manganese steel

Microstructure and Tempering Softening Mechanism of Modified H13 Steel with the Addition of Tungsten, Molybdenum, and Lowering of Chromium

Thermodynamic Research on the Precipitation of Ti2O3, TiN and TiC in Continuous Casting of Titanium Microalloyed Steel