Abstract:The microstructures and mechanical properties of Ti–Nb–V–Mo quaternary microalloyed high strength fire-resistant steel are investigated under different experimental conditions. The results show that the fire-resistant steel with high strength (ultimate tensile strength (UTS), 746 MPa; yield strength (YS), 597 MPa) and a low yield ratio (YS/UTS, 0.80) is successfully developed by rapid cooling combined with a low final cooling temperature. The microalloyed high strength fire-resistant steel tempered at 600 °C×15 min and 600 °C×180 min exhibit yield strength of 440 and 419 MPa, which values significantly exceed two-thirds of the specified yield strength at room temperature(i.e., 307 MPa) for the Q460 (YS ≥ 460 MPa) fire-resistant steel. The mechanical properties at room temperature and 600 °C even meet the requirements for the Q550 fire-resistant steel. The ferritic grain boundaries in the experimental steel tempered for 180 min at 600 °C show excellent stability. The analysis indicates that solid-solution strengthening and precipitation strengthening are important in improving the strength of the studied fire-resistant steel at room temperature and 600 °C, respectively. M(C, N) (M=Nb, V, Ti, and Mo) and M3C (M=Fe, Cr, Mn, and Mo) particles in small quantities are found in the matrix of the as-rolled sample. However, after reheating and tempering at 600 °C, large amounts of M(C, N) (mainly MC) and M3C particles precipitate. With an increasing in tempering time, the amount of nanoscale MC precipitate increases; especially, the amount of the MC particles size smaller than 10 nm, and the mass fraction of Nb, V, and Mo in the MC precipitate also increases, which is consistent with the equilibrium thermodynamic calculation results. This enhancement of the precipitation strengthening of secondary phase particles compensates for strength loss attributing to a decrease in shear elastic modulus and solid solution strengthening at 600 °C.

Precipitation Behavior and Strengthening Effect of (Ti,Mo)C Particles in a Martensitic Steel

Effects of Tempering Temperature on the Microstructure, Strength, and Toughness of Medium-Carbon Ti–Mo-Bearing Martensitic Steel

Effect of Molybdenum Addition on the Precipitation of Carbides in the Austenite Matrix of Titanium Micro-Alloyed Steels

Evolution of (ti, Mo)C Particles in Austenite of a Ti–Mo-bearing Steel

Carbide Precipitation in Austenite of a Ti–Mo-containing Low-Carbon Steel During Stress Relaxation

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Phenomenal Effect of Stable (Ti, Mo)C Nano-Sized Precipitates in Retarding the Recrystallization and Grain Growth in High-Strength Ferritic Steel

Effect of Tempering Temperature and Mo on Microstructure and Properties of Ti Microalloyed Steel

Precipitation behavior of Ti–Nb–V–Mo quaternary microalloyed high strength fire-resistant steel and its influence on mechanical properties

Influences of Quenching Temperature on the Microstructure Evolution and Strength−Toughness of a Novel Medium‐Carbon Ti−Mo‐Bearing Martensite Steel

The effect of Ti–Mo–Nb on the microstructures and tensile properties of a Fe–Mn–Al–C austenitic steel

Effect of Mo content on the thermal stability of Ti-Mo-bearing ferritic steel

Co-Precipitation Behavior in Ferrite Region During Isothermal Process in Ti-Mo-Cu Microalloyed Steel

Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi)C Nanoparticles Addition in 1045 Steel

Precipitation Strengthening of Nano-Scale TiC in a Duplex Low-Density Steel under Near-Rapid Solidification

Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Refinement mechanism of nanoscale Cu-rich precipitates by Mo addition and its effect on strength-toughness of Cu-bearing low carbon high strength steel

Decelerated Coarsening of (ti, Mo)C Particles with a Core–Shell Structure in Austenite of a Ti-Mo-Bearing Steel

Nano-precipitation Behavior and Mechanical Properties of Ti-containing Fe–12Mn–9Al–3Cr-1.4C Medium-Mn Lightweight Steel

Effect of Mo-Related Precipitation Behavior on the Strengthening and Thermal Stability of 4cr5mo2v Die Steel

Microstructure, Mechanical Properties and Wear Resistance of Low Alloy Abrasion Resistant Martensitic Steel Reinforced with TiC Particles