A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles
Bingxu Wang,Yong Xu,Lei Chen,Feng Qiu,Fang Chang,Baixin Dong,Gaoshen Cai,Gary C. Barber
DOI: https://doi.org/10.1002/srin.202400305
IF: 2.1258
2024-07-23
steel research international
Abstract:TiC nanoparticles act as heterogeneous cores to enhance the nucleation rate. The granular pearlite, tempered martensite, and precipitates of high‐Cr hot work die (HHD) steels are effectively refined. Also, TiC nanoparticles strengthen and toughen the substrate, hinder the dislocation movement, separate the contacting areas, and withstand the loads. The wear resistance of HHD steels becomes higher under the room and high temperatures. Excellent wear properties can improve the service performance and service life of high‐Cr hot work die steels. Herein, an innovative method is proposed to introduce TiC nanoparticles into the matrix of high‐Cr hot work die steels, and the effects of TiC nanoparticles on the microstructure and wear resistance of high‐Cr hot work die steels are investigated. In isothermal spheroidizing and quenching and tempering heat treatments, the TiC nanoparticles refine the granular pearlite, tempered martensite, and precipitates, which are attributed to the improved nucleation rates by increasing the number of heterogeneous cores. In sliding wear tests, the nanoparticle‐reinforced high‐Cr hot work die steels show higher wear resistance under the temperatures of 20 and 400 °C. The better wear properties of high‐Cr hot work die steels are because the substrates are strengthened and toughened, the dislocations are hindered, the mating areas are partially separated, and external loads are withstood by nanoparticles. This work shows new prospects for the development of high‐Cr hot work die steels with excellent wear performance.
metallurgy & metallurgical engineering