Abstract:A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+-Si and Si0.7Ge0.3 using a combination of HNO3 oxidation and buffered oxide etching oxide removal processes were investigated. Experimental results showed that oxidation saturates as time goes on because of low activation energy and its diffusion-limited characteristic. An oxidation model was developed to describe the wet oxidation process with nitric acid. The model was calibrated with experimental data, and the oxidation saturation time, final oxide thickness, and selectivity between Si0.7Ge0.3 and p+-Si were obtained. In Si0.7Ge0.3/p+-Si stacks, the saturated relative etched depth per cycle was 0.5 nm (four monolayers), and variation between experiments was about 4% after saturation. A corrected selectivity calculation formula was also proposed, and the calculated selectivity was 3.7–7.7 for different oxidation times, which was the same as the selectivity obtained from our oxidation model. The proposed model can be used to analyze process variations and repeatability, and it can provide credible guidance for the design of other wet digital etching experiments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14018</a>.SEM cross-sectional image and analysis of etched Si/SiGe stacks using the HNO3/HF/CH3COOH mixture; experimental details of HNO3–BOE digital etching; and variation analyses of REPC from the model with different parameter variables (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14018/suppl_file/am0c14018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Selective Chemical Etching of Si Vs. Si1 − X Ge X Using NH 4 OH Solution

Highly Selective Chemical Etching of Si vs. Si[sub 1−x]Ge[sub x] Using NH[sub 4]OH Solution

Selective etching of GaAs substrate

Si1-Xgex/Si Multiple Quantum Well Wires Fabricated Using Selective Etching

Highly Selective Etching of SiGe to Si for GAAFET

Sil−xGex/Si Multiple Quantum Well Wires Fabricated Using Selective Etching

Investigation on Ge 0.8 Si 0.2 -Selective Atomic Layer Wet-Etching of Ge for Vertical Gate-All-Around Nanodevice.

Surface segregation and content variation in Si1-xGex growth on Si in ultrahigh vacuum by CVD

Reactive ion etching of SiGe alloys using HBr

Investigation on Ge0.8Si0.2-Selective Atomic Layer Wet-Etching of Ge for Vertical Gate-All-Around Nanodevice

Reactive Ion Etching of Si1−xGex Alloy with Hydrogen Bromide

Control of selective SiGe etching by enhanced formation of hydroxyl radicals and by surface passivation in peracetic acid solution

Selective Digital Etching of Silicon–Germanium Using Nitric and Hydrofluoric Acids

Fabrication and selective wet etching of Si0.2Ge0.8/Ge multilayer for Si0.2Ge0.8 channel gate-all-around MOSFETs

The Role of Sulfite in the Wetting Etching of Silicon and Silica

Epitaxial growth of high-quality Ge layers on Si with Ge2H6 under UHV-CVD conditions

Reactive ion etching of Si1-xGex alloy with hydrogen bromide

Influence of Sb as surfactant on Ge epitaxial growth on Si(001)

A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids

Etching selectivity of SiO 2 to SiN using HF and methanol at higher pressure up to 900 Pa