Abstract:The quest for higher modulation speed and lower energy consumption has inevitably promoted the rapid development of semiconductor-based solid lighting devices in recent years. GaN-based light-emitting diodes (LEDs) have emerged as promising candidates for achieving high efficiency and high intensity, and have received increasing attention among many researchers in this field. In this paper, we use a self-assembled array-patterned mask to fabricate InGaN/GaN multi-quantum well (MQW) LEDs with the intention of enhancing the light-emitting efficiency. By utilizing inductively coupled plasma etching with a self-assembled Ni cluster as the mask, nanopillar arrays are formed on the surface of the InGaN/GaN MQWs. We then observe the structure of the nanopillars and find that the V-defects on the surface of the conventional structure and the negative effects of threading dislocation are effectively reduced. Simultaneously, we make a comparison of the photoluminescence (PL) spectrum between the conventional structure and the nanopillar arrays, achieved under an experimental set-up with an excitation wavelength of 325 mm. The analysis demonstrates that MQW-LEDs with nanopillar arrays achieve a PL intensity 2.7 times that of conventional LEDs. In response to the PL spectrum, some reasons are proposed for the enhancement in the light-emitting efficiency as follows: 1) the improvement in crystal quality, namely the reduction in V-defects; 2) the roughened surface effect on the expansion of the critical angle and the attenuated total reflection; and 3) the enhancement of the light-extraction efficiency due to forward scattering by surface plasmon polariton modes in Ni particles deposited above the p-type GaN layer at the top of the nanopillars.

Enhancing light extraction of GaN-based blue light-emitting diodes by a tuned nanopillar array

Light extraction enhancement of light-emitting diodes by nanopillar hierarchical structures

Nanopillar-Based Light Emitting Diodes

The Enhancement of Light-Emitting Efficiency Using GaN-based Multiple Quantum Well Light-Emitting Diodes with Nanopillar Arrays

Fabrication and Optical Characterization of Gan-Based Nanopillar Light Emitting Diodes

High-output power GaN-LED based on surface plasmon enhancement

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Light Extraction Enhancement of GaN LEDs by Hybrid ZnO Micro-Cylinders and Nanorods Array

Parameters optimization of nanopatterned sapphire substrates for enhancing light extraction efficiency of GaN-based LEDs

Light Extraction Improvement from GaN-Based Light-Emitting Diodes with Nano-Patterned Surface Using Anodic Aluminum Oxide Template

Fabrication and Improvement of Nanopillar InGaN / GaN Light-Emitting Diodes Using Nanosphere Lithography

Studies Of Improving Light Extraction Efficiency Of High Power Blue Light-Emitting Diode By Photo-Enhanced Chemical Etching

Enhancing Light Output of GaN-based Light-Emitting Diodes with Nanoparticle-Assembled On-Top Layers

Surface-plasmon-enhanced GaN-LED based on the multilayered rectangular nano-grating

Enhanced optical output power of blue light-emitting diodes with quasi-aligned gold nanoparticles

Enhancement of Light Extraction from Microstructured GaN-Based Light Emitting Diodes by Technique of Nanoimprint

GaN-based Blue LEDs with Microstructure on P-Gan Surface Formed by Inductively Coupled Plasma Etching

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Enhanced Light Output of InGaN-Based Light Emitting Diodes with Roughed P-Type GaN Surface by Using Ni Nanoporous Template

Study on Light Extraction from GaN-based Green Light-Emitting Diodes Using Anodic Aluminum Oxide Pattern and Nanoimprint Lithography

Light intensity and efficiency enhancement of n-ZnO/NiO/p-GaN heterojunction-based white light-emitting diodes using micro-pillar array