Abstract:In this paper, three-dimensional multiblade row Navier-Stokes simulations have been performed to investigate the effects of tip clearance size on the flow characteristics of a vaneless counter-rotating turbine. The tip clearance sizes studied in this paper are 0.0mm (without rotor tip clearance), 0.5mm (0.65% high-pressure turbine rotor height, 0.52% low-pressure turbine rotor height), 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm, individually. The numerical results indicate that the air mass flow rate of the vaneless counter-rotating turbine and the ratio of specific work of the high-pressure turbine to that of the low-pressure turbine increase when the rotor tip clearance size is increased. While the isentropic efficiency, the expansion ratio and the power of the vaneless counter-rotating turbine decrease as the tip clearance size is increased. The results also show that the existence of the tip clearance trends to decrease the Mach number at the high-pressure turbine outlet, and increase the Mach number at the low-pressure rotor outlet, especially at near the blade tip region, the extents of the decrease and increase of the Mach number are more remarkable. When the tip clearance size is increased, the Mach number decreases at the outlet of the high-pressure turbine, while increases at the outlet of the low-pressure rotor. The numerical results also illustrate that the existence of the tip clearance trends to decrease the flow angle at the high-pressure turbine outlet, especially at near the blade tip region, the extent of the decrease of the flow angle is more prominent. And the flow angle decreases with the increase of the tip clearance size at the high-pressure turbine outlet. Compared with the results at the high-pressure turbine outlet, the effects of the tip clearance on the flow angle are more complicated at the low-pressure rotor outlet. Along the low-pressure rotor span, the outlet flow angle shows several different evolution laws with the increase of the tip clearance size.

Influence of Clearance Parameters on the Rotor Dynamic Character of Hydraulic Turbine Shaft System

Influence factors of clearance leakage flowrate and clearance hydraulic axial force of pump-turbine

Flow Characteristics Analysis of a High-Head Prototype Pump-Turbine During Turbine Start-Up: Effects of the Clearance

Numerical Study on the Effect of Crown Clearance Thickness on High-Head Pump Turbines

Rotor-dynamic Characteristics Analysis of a Large-Scale Francis Turbine Shaft-System

Influence of Tip Clearance Size on Flow Characteristics of a Vaneless Counter-Rotating Turbine

Influence of the Clearance Flow on the Load Rejection Process in a Pump-Turbine

Influence of Runner Clearance on Efficiency and Cavitation in Kaplan Turbine

Effects Of Tip Clearance On Unsteady Flow Characteristics In An Axial Turbine Stage

Clearance-excitation force of shrouded turbine rotor accounting for pitching motion

Numerical simulation and rotor dynamic stability analysis on a large hydraulic turbine

Models of the Rotor-Seal System for Hydraulic Turbine and Its Nonlinear Dynamics Analysis

Influence of Axial Clearance on the Performance Characteristics of a Turbopump

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Study of the Phase Resonance Phenomenon in Francis Turbine

Rotordynamic Stability under Partial Admission Conditions in A Large Power Steam Turbine

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Influence of axial clearance on load distribution in double supported tapered roller bearings of wind turbine main shaft

Clearance flow patterns and pressure distribution of a pump-turbine: Measurement and simulation of a rotating disk flow

Numerical Study for Effects of Axial Clearance on Low-Pressure Turbine Steady and Unsteady Aerodynamic Performance

Analysis of Tip Clearance Effect on the Transportation Characteristics of a Multiphase Rotodynamic Pump Based on the Non-Uniform Bubble Model