Abstract:An experimental and numerical investigation into the tip leakage flow of a turbine rotor is carried out using a particle image velocimetry (PIV) system and the commercial software ANSYS CFX 14.0. The specimen used in this work is a typical GE-E-3 model with a new squealer tip design. The experimental data are used to create a turbulence model and numerical strategy. Through the validated turbulence model and numerical strategy, simulations are carried out to compare the characteristics of the tip leakage flow in three cases: (1) the blade is rotating, but the shroud is stationary, which is the real status of turbine rotor operation; (2) the blade is stationary, but the shroud moves, to simulate their relative movement; (3) the blade is stationary, and the shroud is also stationary, this is a simplified case, but has been widely used in the experiments on rotor tip leakage flow. Detailed analysis of the flow phenomena shows that the second case is a reasonable alternative approach to simulate the real state. However, the flow patterns in the third case exhibit some evident differences from the real status. These differences are caused by the inaccurate viscous force arising from the stationary blade and shroud. In this work, a modification method for the experiments conducted in the third case is firstly proposed, which is realized through adding an imaginary roughness at the shroud wall to be close to the real viscous effect, and to thereby reduce the deviation of the experiment from the real case. According to the results calculated by ANSYS CFX, the flow structure in the modification case is very close to the real status. Besides, this modification case is an easy and cheap way to simulate the real tip leakage flow.

A FLUID-STRUCTURE INTERACTION MODEL OF TURBINE ROTORS BASED ON A COMPREHENSIVE LEAKAGE FLOW MECHANISM

Clearance-excitation force of shrouded turbine rotor accounting for pitching motion

Effects of Rotor Solidity and Leakage Flow on the Unsteady Flow in Axial Turbine

Models of the Rotor-Seal System for Hydraulic Turbine and Its Nonlinear Dynamics Analysis

A Nonlinear Model Of Rotor-Bearing-Seal System Associated With Leakage Through The Labyrinth Seal

General dynamic model of aeroengine's rotor system during maneuvering flight

A Transient Bulk Flow Model with Circular Whirl Motion for Rotordynamic Coefficients of Annular Seals

A nonlinear model of flow-structure interaction between steam leakage through labyrinth seal and the whirling rotor

A Rotor Dynamics' Finite Element Model with Consideration of the Influential Effect of the Fluid

ANALYSIS OF FLOW-INDUCED VIBRATION OF BLADES FOR A FRANCIS HYDRO TURBINE

Fem Simulation Of Turbulent Flow In A Turbine Blade Passage With Dynamical Fluid-Structure Interaction

Influence of Flow Gap Induced Exciting Forces on Critical Speeds of Rotors

Influence of Axial Clearance on Unsteady Flow Interaction in Turbine Stage

Modeling and Simulations for Fluid and Rotating Structure Interactions

Computation of leakage flow in centrifugal pumps and its effects on rotor vibration

Characteristics Of Centrifugal Pump Rotor System Under Exciting Forces Generated By Shroud Leakage Flows

Effect of Radial Growth on Rotordynamic Characteristics of Labyrinth Seal-Rotor System

Computational Fluid Dynamics Modeling Three-Dimensional Unsteady Turbulent Flow and Excitation Force in Partial Admission Air Turbine

Dynamic Analysis of a Francis Turbine Based on the Fluid-Structure Interaction Theorem

Effect Of Relative Movement Between The Shroud And Blade On Tip Leakage Flow Characteristics

Investigation of Flow-Induced Radial Force and Its Influence on Rotor Dynamics for a Cryogenic Liquid Turbine Expander