Abstract:The circumferentially non-uniform clearance has significant effect on the overall performance and operation safety of high loading compressor rotors. However, both the variation rules and mechanism of flow characteristic in the circumferential, radial and streamwise directions caused by the asymmetric clearance are not fully clarified, which restricts the performance degradation assessment and rubust design of high loading compressors. Therefore, different types of asymmetric tip clearance were designed in this paper to reveal the circumferential fluctuation laws and induced mechanism of key characteristic parameters in full-channel domains of compressor rotor with circumferentially non-uniform clearance. It is shown that the circumferentially non-uniform clearance has less effect on the total pressure ratio and efficiency of compressor rotor, while it causes an obvious deterioration of the stall margin. Furthermore, the circumferentially non-uniform clearance causes the circumferential fluctuations of performance parameters, and the fluctuation amplitude has been affected by the eccentricity ratio and operating condition of rotor directly. In addition, the leakage flow originated from a single channel may pass through about three adjacent channels in rotor with uniform clearance, while it covers almost seven adjacent channels in the rotor with circumferentially non-uniform clearance. In consequence, it is precisely the difference of strength variation of leakage flow in tip region caused by the circumferential distributions of tip clearance that produces an alternated variation of low-velocity zone in rotor prototype and a concentrated distribution of low-velocity zone in the range of 270° to 360° of rotor with non-uniform clearance. Due to the serious blockage appearing in this range, the rotating stall of transonic rotor with circumferentially non-uniform clearance has occurred in advance, even with a maximum drop of 35.94% in stall margin.

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor

Numerical investigation into rotating instability and the vortex structure near the tip in a transonic compressor rotor

Performance Impact of Uncertain Variations of Inlet Flow for Axial Compressor Blades

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Investigation of tip leakage flow unsteadiness and rotating instability in a centrifugal compressor impeller

Numerical Investigation of Relation Between Unsteady Behavior of Tip Leakage Vortex and Rotating Disturbance in a Transonic Axial Compressor Rotor

Effects of tip clearance on flow field and performance of a centrifugal compressor

Numerical investigation on short length-scale disturbance generation in an eccentric axial compressor rotor at a stable condition

Numerical Simulation Of A Transonic Centrifugal Compressor Blades Tip Clearance Flow Of Vehicle Turbocharger

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

A Study on the Mechanism of Tip Leakage Flow Unsteadiness in an Isolated Compressor Rotor

Numerical Investigation on Rotating Instability in a Multistage Axial-Radial Combined Compressor

Circumferential propagation of tip leakage flow unsteadiness for a low-speed axial compressor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Numerical Investigation on the Originating Mechanism of Unsteadiness in Tip Leakage Flow for a Transonic Fan Rotor

Unsteady Analysis on the Effects of Tip Clearance Height on Hot Streak Migration Across Rotor Blade Tip Clearance

Pressure and Velocity Fluctuations Characteristics of the Tip Clearance Flow in an Axial Compressor Stage at the Near-Stall Condition

The unsteadiness of tip leakage vortex breakdown and its role in rotating instability

Numerical study of the coherent characteristics of the blade tip of a micro centrifugal compressor and its application in a new unsteady casing-treatment experiment