Abstract:In this study, a novel sol-gel method is used to synthesize amorphous silica-alumina materials with a narrow mesoporous distribution and various Si/Al molar ratios without using any templates and pore-regulating agents. During the preparation procedure, only inexpensive inorganic salts were used as raw materials, instead of expensive and harmful alkoxides. The precursor sol was dried at room temperature in a vacuum box kept at 60 mmHg until it began to form the gel. The results of a nitrogen sorption experiment indicate that the synthesized materials with different Si/Al molar ratios have similar mesoporous distributions (within 2-12 nm). Moreover, it was found that the material's pore size distribution remains at a similar value during the heat treatment from room temperature to 550 degreesC. On the basis of the nitrogen sorption, TEM, and AFM characterization results, a formation mechanism of mesopores which accounts for the experimental data is also suggested. This suggested mechanism involves rearrangement of the primary particles during the drying process to form the precursors of the similarly sized mesopores. The synthesized materials were characterized by XRD, thermal analysis (TG/DTA), Al-27 and Si-29 MAS NMR spectroscopy, SEM, TEM, and AFM. The results of Al-27 and 29Si MAS NMR indicate that the distribution of silicon and aluminum in the synthesized materials is more uniform and homogeneous than that in the mixed oxides prepared via the traditional sol-gel method even at high alumina contents. The type and density of the acid sites were studied using pyridine adsorption-desorption FTIR spectroscopy. It was shown that the acidity of the synthesized materials is higher than that of the silica-alumina materials prepared by conventional methods.

Synthesis of Beta-Sialon Nanopowder by Ammonolysis of Alumina-Silica Gel

Preparation of Single Phase Nano-Sized Β-Sialon Powders by Nitridation of Silica–alumina Gel in Ammonia

Controllable Synthesis Of High-Purity Beta-Sialon Powder

Sol-Gel Synthesis of Alumina Using Inorganic Salt Precursor

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Controllable Synthesis of High-purity β-SiAlON Powder

Controllable Synthesis of High-purity β-SiAlON Powder: Controllable Synthesis of High-purity β-SiAlON Powder

Synthesis and sintering behavior of a nanocrystalline α-alumina powder

Synthesis of Aluminium Borate Nanowires by Sol–gel Method

Nano Β-Sialon Powder Synthesized by Carbothermal Reduction and Nitridation of Ultrafine Al2O3-SiO2 Mixture Employing Sol-Gel Techniques

Synthesis of single phase β-SiAlON ceramics by reaction-bonded sintering using Si and Al2O3 as raw materials

Synthesis of O′-SiAlON ultrafine powder

The Preparation of Β-Sialon Powder from High-Alumina Fly Ash: an Experimental Study

Preparation of SiC and Si3N4 Powders by Ammono Sol-Gel Processing

Synthesis of AlN nanocrystalline powders

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Synthesis of Spherical-Like Β-Si3n4 Powder by Direct Nitridation of Silicon Saw Dust

Preparation of Β"-Alumina with Η Type Nanometer Alumina Powder Via Solid Phase Synthesis

Synthesis of Mgal2o4-Sialon Composite Powders by Carbothermal Nitritdation of Forsterite and Alumina

Synthesis of Sialon Powders from Aluminium Dross and Fly Ashes

Fabrication and Evaluation of β-SiAlON Nanoceramics