Abstract:An atmospheric pressure mist chemical vapor deposition (mist-CVD) system has been developed to prepare zinc oxide (ZnO)-based thin films. This is a promising method for large-area deposition at low temperatures taking into account of its simplicity, inexpensiveness, and safety. Nominally pure ZnO, Al-doped n-type ZnO (ZnO:Al), and N-doped p-type ZnO (ZnO:N) thin films, as well as Zn1−xCdxO and Zn1−yMgyO alloy films, have been deposited by this mist-CVD system. The films deposited at the temperatures ranging from 400 to 500°C were of an acceptable crystallinity with (002) preferential orientation and homogeneous surface. All the films exhibited high transmittance of about 90% in visible regions and dominant UV emission in the photoluminescence spectra. The n-type ZnO:Al films had a low resistivity of 1.08×10–3Ωcm at an optimal Al content of 4at%. The p-type conductivity was obtained in ZnO:N films annealed at higher temperatures with a resistivity of 72.8Ωcm, Hall mobility of 2.28cm2V−1s−1, and hole concentration of 3.76×1016cm−3, as confirmed by Hall-effect measurements. A hydrogen-assisted nitrogen-doping mechanism was proposed to answer for the realization of p-type conductivity in ZnO. The films of Zn1−xCdxO and Zn1−yMgyO ternary alloys were also deposited by this technique. The band gap energies, for instance, were 3.05eV for Zn1−xCdxO (x=0.06), 3.28eV for ZnO, and 3.56eV for Zn1−yMgyO (y=0.11), as confirmed by the optical absorption spectra. The band gap engineering could be readily realized in the ZnO system using mist-CVD.

Texture-etched broad surface features of double-layered ZnO:Al transparent conductive films for high haze values

Enhancement of the Light Trapping by Double-Layered Surface Texture of ITO/AZO and AZO/AZO Transparent Conductive Films

Properties of Texture-etched ZnO∶Al Substrates

Texture surfaces and etching mechanism of ZnO:Al films by a neutral agent for solar cells

Plasma-induced Surface Textures of ZnO:Al Transparent Conductive Films

Newfangled crater-nanorod/honeycomb-like double-textured ZnO:Al films with enhanced light trapping

Zno-based Thin Films Synthesized by Atmospheric Pressure Mist Chemical Vapor Deposition

Influence of water content in mixed solvent on surface morphology, wettability, and photoconductivity of ZnO thin films.

Novel etch process to tune crater size on magnetron sputtered ZnO:Al

Method for Fabricating Textured High-Haze ZnO:Al Transparent Conduction Oxide Films on Chemically Etched Glass Substrates

Development of textured ZnO-coated low-cost glass substrate with very high haze ratio for silicon-based thin film solar cells

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

A Chemical Strategy to Reinforce Electrically Pumped Ultraviolet Random Lasing from ZnO Films

The properties of surface textured ZnO:Al films grown in hydrogen atmosphere

Preparation and Wettability of Zn–Al Layered Double Hydroxide Film Directly Grown on Highly Porous Anodic Alumina Oxide Template

Superior Texture-Controlled Zno Thin Film Using Electrochemical Deposition

Wet Chemical Etching of ZnO Film Using Aqueous Acidic Salt

Tailoring the Morphology, Optical and Electrical Properties of DC-sputtered ZnO:Al Films by Post Thermal and Plasma Treatments

Wet Etching: Controlling the Facet of ZnO During Wet Chemical Etching Its (0001¯) O‐Terminated Surface (small 14/2020)

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

Facile bottom-up growth of pyramidally textured ZnO:Al films by combined chemical bathing and DC sputtering deposition