Abstract:Solar cells of p-CIS/n-buffer/ZnO type, where CIS is (CuInS2, CuInSe2 or intermediates, are thin-film-based devices for the future high-efficiency and low-cost photovoltaic devices. As important thin film, the properties of Al-doped ZnO (AZO) directly affect the parameter of the cell, especially for large volume. In the present paper, AZO semiconductor transparent thin film on soda-lime glass was fabricated using cylindrical zinc-aluminum target, which can not only lower the cost of the target but also make the preparation of large area AZO thin film more easily. Using the DC magnet sputtering techniques and rolling target, high utilization efficiency of target was achieved and large area uniform and directional film was realized. An introduction to DC magnet sputtering techniques for large area film fabrication is given. With different measurement methods, such as X-ray diffraction (XRD) and scan electron microscope (SEM), we analyzed large size film's structure, appearance, and electrical and optical characteristics. The XRD spectrum indicated that the AZO film shows well zinc-blende structure with a preferred (002) growth and the c-axis is oriented normal to the substrate plane. The lattice constant is 5.603 9 nm and the mismatch with CdS thin film is only 2 percent. It absolutely satisfied the demand of the GIGS solar cell. The cross-section of the AZO thin film indicates the columnar structure and the surface morphology shows that the crystal size is about 50 nm that is consistent with the result of XRD spectrum. By the optical transmission curve, not only the high transmission rate over 85 percent in the visible spectrum between 400 nm and 700 nm was showed but also the band gap 3.1 eV was estimated. And all these parameters can meet the demand of the large area module of GIGS solar cell. The result is that using alloy target and Ar gas, and controlling the appropriate pressure of oxygen, we can get directional, condensed, uniform, high transmitting rate, low resistance and large size (300 mm x 300 mm) AZO film.

Superior Texture-Controlled Zno Thin Film Using Electrochemical Deposition

Surface Morphology, Electrochemical and Electrical Performances of ZnO Thin Films Sensitized with Ag Nanoparticles by UV Irradiation

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

B23-O-15 Van Der Waals Epitaxial Growth of Highly-textured ZnO Thin Film on Surface-modified Silicon Substrates by Chemical Bath Deposition

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Growth of Textured ZnO Thin Films and Their Front Electrodes for Application in Solar Cells

Light Scattering by Textured Al-Doped Zinc Oxide Film for Thin Film Silicon Solar Cells Coated on Glass Substrates

Electrochemical Deposition of Al-doped ZnO Transparent Conducting Nanowire Arrays for Thin-Film Solar Cell Electrodes

Development of textured ZnO-coated low-cost glass substrate with very high haze ratio for silicon-based thin film solar cells

Texture surfaces and etching mechanism of ZnO:Al films by a neutral agent for solar cells

Characterization of Surface Morphology and Light Scattering of Transparent Conducting ZnO:Al Films as Front Electrode for Silicon Thin Film Solar Cells

Modified Textured Surface Mocvd-Zno:B Transparent Conductive Layers for Thin-Film Solar Cells

Antisolvent‐ and Annealing‐Free Deposition for Highly Stable Efficient Perovskite Solar Cells via Modified ZnO

Electrochemical Deposition and Characterization of Wide Band Semiconductor ZnO Thin Film

Mechanism and Optimized Process Conditions of Forming One-Dimensional ZnO Nanorods with Al-Doping by Electrodeposition Method

Atomic layer deposition of Al-doped ZnO nanomembrane with in situ monitoring

Controllable Preparation of 2D and 3D ZnO Micro-Nanostructures and Their Photoelectric Conversion Efficiency

Prepareation of Large Area Al-ZnO Thin Film by DC Magnetron Sputtering

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices