Abstract:Modern aviation components have higher requirements for high temperature resistance, high strength and lightweight materials, and ceramic matrix composites have superior overall performance. However, its high brittleness and anisotropy lead to a challenge for manufacturing. In order to understand the formation conditions and the evolution of surface microstructures of the Cf/SiC microgrooves processed by ultrafast laser comprehensively, we designed a single-factor experiment and performed sensitivity analysis. The experiment results showed that the pulse energy had great effects on the depth of the microgroove, and the intense ablation caused more active oxidation of SiC to occur, generating more SiO(g). However, too much pulse energy may cause the material removal mechanism to be more due to the photothermal effect rather than the plasma effect. Low repetition frequency caused a large number of laminated connections in the microgroove and the oxide gradually changed from lumpy to flocculent as the repetition frequency increased. The more scanning times, the more ablation products sputtered onto the sample surface, including unablated carbon fibers. Shallow depth and ablation residues remained in the microgroove occurred under few scanning times. Although too fast scanning speed leaded to a rapid decrease in the microgroove depth, too slow scanning speed also generated more unablated carbon fibers sputtering out of the microgrooves. The microgroove depth had the highest sensitivity to the repetition frequency, followed by the pulse energy and scanning speed. The pulse energy and scanning speed had a greater effect on the oxide layer height, the repetition frequency affected the oxide layer width, and the scanning speed affected the microgroove width significantly. According to the processing requirements and the hot spot map, the processing parameters that can be adjusted effectively will be able to be obtained.

Multiple nanoscale parallel grooves formed on Si3N4/TiC ceramic by femtosecond pulsed laser

Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser

Sub-wavelength Ripple Formation on Silicon Induced by Femtosecond Laser Radiation

Laser-induced gradient microstrcutres on Si3N4 ceramics and their wettability analysis

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Femtosecond Laser Nanostructuring on a 4H-Sic Surface by Tailoring the Induced Self-Assembled Nanogratings

One-step fabrication of fine surfaces via femtosecond laser on sliced SiC

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

Femtosecond laser filament ablated grooves of SiC ceramic matrix composite and its grooving monitoring by plasma fluorescence

Fabrication of Nanostructures on 6H SiC Crystal Induced by Femtosecond Laser

A combined model for formation mechanism of ripples induced by femtosecond laser on silicon carbide

Wetting behavior of Al on the surface of SiC textured by nanosecond laser

Experimental Study on Femtosecond Laser Processing Performance of Single-Crystal Silicon Carbide

Laser Etching of Groove Structures with Micro-Optical Fiber-Enhanced Irradiation

Laser patterning captured in real-time: surface modifications of multilayer thin-films under nanosecond laser heating

Formation and Evolution of Micro/Nano Periodic Ripples on 2205 Stainless Steel Machined by Femtosecond Laser

Fabrication of highly homogeneous and controllable nanogratings on silicon via chemical etching-assisted femtosecond laser modification

Coalescence and dislocation of laser induced periodic ripples on silicon by double time delayed femtosecond laser beams

Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation

Surface microstructure evolution of Cf/SiC ceramic matrix composite microgrooves processed by ultrafast laser