Abstract:To address the challenge of designing grouting reinforcement in a deep shaft to control water, this study established an elastic-plastic analytical formula for the grouted rock surrounding a shaft under the combined action of thermal, hydraulic, and mechanical fields based on the Mohr–Coulomb yield criterion. The various rules and influencing factors of stability and impermeability of the grouted rock surrounding the shaft are calculated and analyzed. The analysis shows that damage to the surrounding rock is aggravated by the action of high ground temperature and high water pressure in deep shafts, and the influence of water pressure is particularly significant. The larger the radius and cohesion of the grouted surrounding rock, the smaller the radius of its plastic zone. With an increase in the elastic modulus ratio between the grouted surrounding rock and the original rock, the radius of its plastic zone increases, so the elastic modulus of the grouted surrounding rock design should consider the original surrounding rock. With a decrease in the permeability coefficient of the grouted surrounding rock, the radial stress decreases, the tangential stress increases, and the radius of the plastic zone increases. The development of plastic zone not only affects the stability but also causes an increase in the permeability coefficient. There is mutual restriction and influence between the shaft water inflow, the permeability coefficient, the radius of the grouted surrounding rock, and the radius of its plastic zone. In the design of grouting reinforcement, the stability of surrounding rock and the control requirements of shaft water inflow should be comprehensively considered and the optimal parameters should be selected based on theoretical calculation. This study provides a theoretical basis for the optimization of grouting reinforcement parameters in a deep shaft.

Response Evaluation of Axially Loaded Grouted Drilled Shaft

Numerical Modeling of Grouted Connection Damage Development under Uniaxial Loading

AXIAL BEARING CAPACITY OF HIGH STRENGTH GROUTED CONNECTIONS WITH SHEAR KEYS

ANALYSIS OF RESIDUAL STRESS ON PILE-BASE POST GROUTING PILE

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Assessment of design methods for axial bearing capacity of driven piles in clay

Full-scale Field Load Testing of Long Drilled Shafts with Enlarged Base Constructed in Marine Sediment

Prestressing effect evaluation for a grouted shaft: a case study

Separating Contributions from Pre-Mobilization and Ground Improvement for Post-Grouted Drilled Shafts

Static and Dynamic Load Tests of Shaft and Base Grouted Concrete Piles

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

Evaluation of interpretation criteria for drilled shafts with tip post-grouting

Axial Bearing Capacity of Large-Diameter Grouted Connections Analyzed by Means of A Simplified Double Shear Test

Field study on the behavior of pre-bored grouted planted pile with enlarged grout base

Bearing Performance of Geothermal Energy Pile Subjected to Thermal Loading

Vertical Bearing Capacity of Large-Diameter Bored Pile

Theoretical analysis of grouting reinforcement for surrounding rock of deep shaft based on stability and water inflow control

Field Behavior of Pre-Bored Grouted Planted Nodular Pile Embedded in Deep Clayey Soil

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

A new method for extrapolating the load-displacement response of drilled shaft foundations for interpretation of side capacity