Abstract:Over Ni nanoparticles generated by means of a combined sol-gel/reduction method, crystalline plait-like carbon nanocoils (CNCs) were synthesized in acetylene pyrolysis at 415 degrees C. The field-emission scanning electron microscope (FE-SEM) and high-resolution transmission electron microscope (HR-TEM) images reveal that there are often two CNCs in opposite handedness fused in one nanoplait. By optimization of reaction parameters, maximum purities and yields of plait-like CNCs and single CNCs were 99.35 wt % and 99.53 wt %, and ca. 18759.8% and 21269.6%, respectively. The pyrolysis of acetylene was carried out at 415 degrees C, and no dilute gas such as argon and nitrogen was needed. Thus, we have provided a simple, low-cost, and environmentally friendly approach for the mass production of CNCs with ultrahigh purity. The microwave absorption properties of the as-prepared plait-like CNCs and single CNCs were examined systematically. The results demonstrated that the as-prepared plait-like CNCs exhibit good microwave absorbing ability. The effects of the temperatures for acetylene pyrolysis and for NiO powder reduction in the CNCs synthesis on the morphology, yield, and microwave absorption properties of carbon products were also investigated.

Synthesis and Magnetic Properties of Aligned Carbon Nanotubes by Microwave-Assisted Pyrolysis of Acetylene

Large‐Scale Synthesis, Annealing, Purification, and Magnetic Properties of Crystalline Helical Carbon Nanotubes with Symmetrical Structures

Effect of catalyst on the growth of aligned carbon prepared by microwave chemical vapor deposition

Production of Aligned Carbon Nanotube Films and Nitrogen Doped Carbon Nanotube Films from the Pyrolysis of Styrene

Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites

Aligned Cnx Nanotubes By Pyrolysis Of Ferrocene/C-60 Under Nh3 Atmosphere

Microstructure of the pyrocarbon in aligned carbon nanotube/carbon composites

Fabrication and Characterization of Aligned Cnt/C Composites

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Synthesis and Characterization of Well-Aligned Carbon Nitrogen Nanotubes by Microwave Plasma Chemical Vapor Deposition

The Fabrication And Characterization Of N-Doped Aligned Carbon Nanotube Arrays In Large Area

Synthesis of Plait-Like Carbon Nanocoils in Ultrahigh Yield, and Their Microwave Absorption Properties

Characterization and Magnetic Properties of Helical Carbon Nanotubes and Carbon Nanobelts Synthesized in Acetylene Decomposition over Fe−Cu Nanoparticles at 450 °C

Microwave Absorbing Properties and Magnetic Properties of Different Carbon Nanotubes

Effects of Temperature and Catalyst Concentration on the Growth of Aligned Carbon Nanotubes

Synthesis of Helical Carbon Nanotubes, Worm-Like Carbon Nanotubes and Nanocoils at 450 °C and Their Magnetic Properties

Low-temperature catalytic growth of carbon nanotubes under microwave plasma assistance

Thermal Properties of Aligned Carbon Nanotube/Carbon Nanocomposites

Enhanced Microwave Absorption Properties and Mechanism of Core/shell Structured Magnetic Nanoparticles/carbon-Based Nanohybrids

Preparation of aligned carbon nanotube arrays by pyrolysis of iron (II) phthalocyanine and ethylene

Synthesis, Photoluminescence, and Magnetic Properties of Nitrogen-Doping Helical Carbon Nanotubes