Abstract:Continuous damage accumulation resulting from void nucleation, growth, and coalescence leads to the final ductile fracture. The Gurson–Tvergaard–Needleman (GTN) model and its extensions, which model these mechanisms, are famous coupled constitutive models for predicting material failure. In this study, the GTN model was extended by incorporating two different damage variables: void volume fraction and shear damage; this was done to describe damage accumulation and ductile fracture under a wide range of stress states from compression-dominated to tension-dominated ones. The shear damage was composed of the shear void nucleation related to secondary voids and shear deformation damage. In addition, the shear void nucleation and void closure effect resulting from compression deformation were introduced to model the change in void volume under different loading conditions. The Lode angle dependence function was updated to express the various stress states and competition mechanism between two damage variables. Furthermore, the effective damage and its incremental form was used to define the extent of damage accumulation and fracture initiation. Subsequently, the proposed model was implemented in finite element software through user subroutines, and three distinct experiments related to high, low, and negative stress triaxiality were performed to calibrate the model parameters by the inverse analysis method for 1045 steel and 2024-T351 aluminum alloy. The experimental results under proportional and path-changing loading conditions were used to analyze the damage evolution and validate the proposed model. The good agreement between the numerical prediction and experimental results for the displacement and location at fracture, indicates good predictive ability of formulated model under arbitrary loading conditions.

Derivation of Constraint-Dependent J–R Curves Based on Modified $$T$$ T -Stress Parameter and GTN Model for a Low-Alloy Steel

Constraint-Dependent J-R Curves of A Dissimilar Metal Welded Joint for Connecting Pipe-Nozzle of Nuclear Pressure Vessel

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Geometry and Material Unified Constraint-Dependent J-R Curves of a Dissimilar Metal Welded Joint

Establishment of Unified Correlation of In-Plane and Out-of-Plane Constraints with Ductile Fracture Toughness of Steel

An engineering approach to remove the specimen geometry constraint dependence of elastic-plastic fracture toughness

Unified Correlation of In-Plane and Out-of-Plane Creep Constraints with Creep Crack Growth Rate

Modified Gtn Model for A Broad Range of Stress States and Application to Ductile Fracture

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Three-dimensional analyses of in-plane and out-of-plane crack-tip constraint characterization for fracture specimens

Quantifications of crack constraint effects in an austenitic steel

Three-dimensional finite element analyses of in-plane and out-of-plane creep crack-tip constraints for different specimen geometries

Quantification of the Complex Crack Geometry Effect on Fracture Resistance Using Strain-Based Finite Element Damage Analysis

Material Parameters in the GTN Model for Ductile Fracture Simulation of G20Mn5QT Cast Steels

Crack-tip Constraint Analysis of Bending Specimens for Considering Higher Order Terms in Asymptotic Solution

A General Correlation Between Ductile Fracture Toughness and Unified Constraint Parameter for Different Materials

Test-and-FE-based method for obtaining complete stress-strain curves of structural steels including fracture

Numerical Prediction of Creep Crack Growth Rate in Cr-Mo-V Steel for Specimens with Different Constraints

Tension–torsion fracture experiments – Part II: Simulations with the extended Gurson model and a ductile fracture criterion based on plastic strain

Extended GTN Model for Predicting Ductile Fracture under a Broad Range of Stress States

Experimental research on the fatigue crack growth behaviour of Q420C