Abstract:Fracture toughness is an important material property used to perform the integrity assessment of engineering components containing cracks. Due to the difference in crack tip constraint, specimens may show different fracture toughness. The constraint difference for cruciform specimen with shallow crack, compact tension (CT) specimen and three point bending specimen with shallow and deep cracks are investigated. Both linear elastic and elastic-plastic fracture mechanics are applied to study the constraint effect based on two-parameter fracture criterion. Crack tip constraint depends on the applied loading. J-A(2) method is used to precisely capture the crack tip constraint and crack tip stress distributions. Local approach to fracture can be applied to transfer the fracture toughness among different specimens under uniaxial and biaxial loadings. In case of positive T.,fre, T-stress increases with K-1. In the case of negative T-stress T-stress decreases with K1. Q(-stress) generally decreases with applied loading for both deep crack and shallow crack cases. Loss of constraint occurs for the single-edged bending (SEB) specimen with deep crack and thus raises the question whether the SEB specimen is proper to be used to obtain material toughness. For the cruciform bending (CRB) specimen, the constraint at the crack tip surface shows a least constraint while the deepest point has a relatively higher constraint. At a fracture probability of 10%, the fracture toughness difference between CT specimen and CRB specimen is about 50 MPa m(0.5), i.e 200% of the fracture toughness. This big difference demonstrates the importance of considering the constraint effects in the integrity analysis.

Crack-tip Constraint Analysis of Bending Specimens for Considering Higher Order Terms in Asymptotic Solution

Crack-tip Constraint Analysis of Cylinder Structure with Axial Penetrating Crack at Outside Surface

Crack-tip Constraint Analysis of SENB Specimen under Creep Condition

An Improved Crack-Tip Element Treatment for Advanced FEMs

Crack-tip Constraint Analysis of Two Collinear Cracks under Creep Condition

Crack-tip Constraint and S Stable Growth of Crack in Plane Stress Case

Comparison of Constraint Analyses with Global and Local Approaches under Uniaxial and Biaxial Loadings

J-Integral Evaluation for Interface Crack of Bimetal Loaded by Normal Three-Point Bending(Modeling & Simulation)

Stress triaxiality in crack tip regions of bend specimens with different crack-depth and fracture criterion at initiation

A Higher-Order Asymptotic Solution for 3d Sharp V-Notch Front Tip Fields in Creeping Solids

A Unified Method to Solve Higher Order Asymptotic Crack-Tip Fields of Mode I, Mode II and Mixed Mode I/II Crack in Power-Law Creeping Solids

Quantification of crack tip constraint effect based on the critical distance

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Stress Triaxiality Constraint and Crack Tip Parameters

An engineering approach to remove the specimen geometry constraint dependence of elastic-plastic fracture toughness

Non-linear Analysis on Cast Tubular T-joint Loaded by In-Plane Bending

Three-dimensional analyses of in-plane and out-of-plane crack-tip constraint characterization for fracture specimens

Derivation of Constraint-Dependent J–R Curves Based on Modified $$T$$ T -Stress Parameter and GTN Model for a Low-Alloy Steel

Constraint evaluation and effects on selected fracture parameters for single-edge notched beam under four-point bending

Constraint-Dependent J-R Curves of A Dissimilar Metal Welded Joint for Connecting Pipe-Nozzle of Nuclear Pressure Vessel

Mode-I Plane-Stress Crack-Tip Constraint for Elastic-Plastic Materials with Different Strain-Hardening