Abstract:The limitations of the established and existing creep failure models have inspired the development of a new creep prediction model. Models like Norton–Bailey and Omega are unable to model the tertiary creep curve for engineering materials. Kachanov–Rabotnov, Theta Projection, and Sine hyperbolic models rely on specific material properties for accurate damage predictions. In order to overcome these weaknesses, a new creep model combining the Norton–Bailey and Kachanov–Rabotnov models has been further devised for the creep life prediction of metallic materials. The model combination helps in covering the limitations of one model over another and to benefit from each other's strengths. A technique of user subroutine scripting was adapted to implement the new creep model in finite element (FE) software of ABAQUS, manufactured by Dassault Systemes, version 2020. The new model was tested on an FE dog bone stainless steel 304 specimen; the analysis showed excellent agreement with the experimental creep deformation data at 600 °C to 700 °C. The creep strain rate curves obtained by the method of user subroutine scripting were found to be 90.69% accurate to the 1000 h experimental creep strain rate curve. Similarly, while comparing with the 336 h experimental creep test, the new model accuracy was found to be 92.66% for the creep strain rate curve. The new model's precision was 91.56% when compared with the Omega and Norton–Bailey models for creep strain rate for the same conditions. The quantitative accuracy of the new creep model is better as compared to the existing creep models and can be an improved source of alternatives to existing creep models for the deformation predictions.

Numerical Prediction of Creep Crack Growth Rate in Cr-Mo-V Steel for Specimens with Different Constraints

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Creep crack growth prediction using a damage based approach

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

Effect and mechanism of constraint on creep crack growth behavior of GH3535 alloy

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter A

Modelling short crack growth under creep-fatigue interaction for different dwell times

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

A Statistical Mo Del to Predict the Steady-State Creep Rate

AN ANALYSIS OF ELASTIC-PLASTIC-CREEP DAMAG FOR SMALL PUNCH CREEP TEST

An improved life prediction strategy at elevated temperature based on pure creep and fatigue data: Classical strain controlled and hybrid stress-strain controlled creep-fatigue test

New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling