Abstract:The friction and wear behavior of Cu-nanosized TiB2 in-situ composites in dry sliding against Cu-graphite composite was investigated on a pin-on-disk test rig. It was found that the friction and wear characteristics of the Cu-nanosized TiB2 in-situ composite were closely dependent on the applied load and the sliding speed. The wear rate and the friction coefficient of the in-situ composite increased with the increase of the applied load. Owing to the interfacial cracking under a higher applied load, the wear of the composite with high content of TiB2 would transit from the mild wear to severe one over the applied load range from 10 N to 80 N. Under a moderate applied load, the wear rate and the friction coefficient of the in-situ composite decreased with the increase of the sliding speed, which was attributed to the formation of a protective oxide film on the sliding surface and the reinforcement of nanosized TiB2 particles in the Cu matrix. The later made the hardness of the subsurface layer maintained and the strength of the composite maintained as well at the increased temperature of the sliding surface under a relatively higher sliding speed. The Cu-nanosized TiB2 in-situ composite was dominated by plastic flow and oxidation wear in sliding against the Cu-graphite composite at a higher sliding speed.

Effect of Load on the Tribology Behavior of Cu-Based Self-Lubricating Composite

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Effect of Lubricating Condition on Tribological Properties of Nano-SiO2 Filled Polyamide Composite

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Tribology performance of Cu-C/C composites with and without current

Electrical sliding wear behavior of TiB2 nanoparticles reinforced copper matrix in-situ composite

Tribological Behavior and Wear Mechanism of Cu-SiO2 Sintered Composite under Different Sliding Speeds

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

A research on the electrical sliding behavior wear of dual-scale particulate reinforced copper matrix composites

Dry Sliding Friction and Wear Behavior of Cu-Nanosized TiB2 In-situ Composites

Mechanical and tribological property of Cu/CrB 2 composites under dry sliding condition

Effect of counterpart materials on tribological behaviors of copper impregnated carbon/carbon composite under electric current condition

An Investigation of the Sliding Wear Behavior of Cu-Matrix Composite Reinforced by Carbon Nanotubes

Sliding Wear of WC-Ni-based Self-lubricating Composites with the Addition of Fullerene-like WS2 Nanoparticles against WC-Ni Cermet

Dry sliding wear behavior of in situ Cu–TiB2 nanocomposites against medium carbon steel

Effects of Temperature and Normal Load on Tribological Behavior of Nickel-Based High Temperature Self-Lubricating Wear-Resistant Composite Coating

Dry sliding tribological behavior of C/SiC under different load and speed

Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current

Study on the Tribology Properties of the Particles/Cu Composite Coatings

Friction and wear behavior of CuFe3Al powder metallurgical composites in dry sliding

Tribological behavior of aluminum matrix composites reinforced with ceramic particulates in dry sliding against a semimetallic friction material