Abstract:Abstract Gallium nitride (GaN) thin films have attracted considerable attention for manufacturing optical and electronic devices. They have wide bandgap and superb performance in these applications. The reliability and durability of optoelectronic devices depend on the quality of the GaN thin films. The metal-organic chemical vapor deposition (MOCVD) process is a common manufacturing technique for fabricating high-quality thin films. By manipulating the operating conditions and the reactor design, one can control the deposition rate and the uniformity of the thin film. In this paper, the manufacturing process for GaN thin films in a multi-wafer MOCVD reactor is simulated based on the three-dimensional computational model of an experimental system which provides data for validation as well as realistic design parameters. The reactor pressure and the flow rate of the precursor, trimethyl-gallium (TMG), significantly affect the deposition rate and film uniformity. The incursion of impurities in the deposition can be reduced by increasing the volumetric ratio of NH3 to TMG (V/III) and reducing the reactor pressure. The deposition rate and quality of the thin film are enhanced using an appropriate mixture of H2 and N2 as the carrier gas. The design of the inlet can also be varied to improve the utilization of metal-organic precursors and increase the deposition rate. This paper presents and discusses results on these aspects for this important manufacturing process. Thus, it leads to a better understanding of the basic mechanisms involved and provides guidelines for obtaining high deposition rates with high film quality in practical chemical vapor deposition reactors.

Buffered distributed spray MOCVD reactor for LED production

Simulation-Assisted Design of Metal Organic Chemical Vapor Deposition Reactor

Operational Optimization of GaN Thin Film Growth Employing Numerical Simulation in a Showerhead MOCVD Reactor

Numerical Study And Optimization Of Gan Thin-Film Growth By Mocvd Method

MOCVD Process Numerical Simulation of GaN and Geometrical Optimization of the Showerhead Reactor

Manufacturing of Gallium Nitride Thin Films in a Multi-Wafer MOCVD Reactor

Simulation of Heat Transfer in a Vertical Tubular CVD Reactor

Simulation of a New Style Vertical HVPE System

Structural Modulation of GaN Nanowires Grown in High-Density Plasma Environment

Development of Vertical High-Vacuum MOCVD and Its Applications in GaN Epitaxial Growth and GaN-Based Device Fabrication

A Modeling and Experimental Study on the Growth of VCSEL Materials Using an 8 × 6 Inch Planetary MOCVD Reactor

CFD NUMERICAL SIMULATION AND OPTIMIZATION OF GAN-MOCVD REACTOR

Numerical Simulation of Gas Phase and Surface Reaction for Growth of GaN by MOCVD

Study on the optimization of the deposition rate of planetary GaN-MOCVD films based on CFD simulation and the corresponding surface model

Research on Auto-split GaN-based Vertical Structure LED

Development of a polysilicon chemical vapor deposition reactor using the computational fluid dynamics method

Growth rate control and phase diagram of wafer-scale Ga2O3 films by MOCVD

Single Wafer Atomic Layer Deposition Reactor Design

An inductively coupled plasma metal organic chemical vapor deposition based on showerhead structure for low temperature growth

Enabling MOCVD production on next generation 150 mm Indium Phosphide wafer size

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes