Abstract:Charge trap memory devices with Zr x Si1–x O2 films as charge trapping layer consisting of nine [(ZrO2) m (SiO2) n (ZrO2) m (SiO2) n ] units have been fabricated and investigated. The composition distribution was modulated by controlling the m and n values in each unit. It is observed that the variation of composition distribution can induce the energy band bending and additional potential barrier, which significantly improve the program/erase speed and data retention characteristics as well as extending the temperature insensitive range. When the effective potential barrier including classic potential barrier and additional potential barrier is 1.52 eV, the memory device exhibits a lower charge loss of 4.5% at 200 °C over a period of 104 s, a wider temperature insensitive range of 20 °C–111 °C, and a faster program time of 4.0 × 10−5 s achieving +6 V flat band voltage shift. The effective potential barrier values should be in the range of 1.52–1.36 eV, taking into consideration the trade-off between the retention and program/erase speed. The additional potential barrier can increase the electron tunneling distance in the directions of tunneling layer and blocking layer, giving rise to recapture process and temperature insensitive of retention characteristics. In addition, the additional potential barrier decreases the electron tunneling distance arriving trapping layer conduction band, improving the program speed. The results provide a reference to trapping layer composition distribution for future charge trap memory applications.

Performance Improvements of Metal–Oxide–Nitride–Oxide–Silicon Nonvolatile Memory with ZrO2Charge-Trapping Layer by Using Nitrogen Incorporation

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Improved Memory Characteristics by NH3Post Annealing for ZrO2Based Charge Trapping Nonvolatile Memory

Enhanced Memory Performance by Tailoring the Microstructural Evolution of (zro 2 ) 0.6 (sio 2 ) 0.4 Charge Trapping Layer in the Nanocrystallites-Based Charge Trap Flash Memory Cells

Improved Memory Characteristics by NH 3 Post Annealing for ZrO 2 Based Charge Trapping Nonvolatile Memory

Enhanced charge storage characteristics by ZrO2 nanocrystallites precipitated from amorphous (ZrO2)0.8(SiO 2)0.2 charge trapping layer

Improvement of the Charge Retention of a Non-Volatile Memory by a Bandgap-Engineered Charge Trap Layer

Effect of Energy-Band Bending Induced by Precipitation of ZrO2nanocrystals on Memory Characteristics of Charge-Trap Flash Memory

The Charge Storage Characteristics of Zro2 Nanocrystallite-Based Charge Trap Nonvolatile Memory

Electronic Structure and Charge-Trapping Characteristics of the Al2O3-TiAlO-SiO2 Gate Stack for Nonvolatile Memory Applications

Improved Performance of NbOx Resistive Switching Memory by In-Situ N Doping

Characteristics of Metal-Pb(Zr0.53Ti0.47)O3-TiO2-Si capacitor for nonvolatile memory applications.

Correlation between memory characteristics and energy band bending resulted from composition distribution of trapping layer for charge trap memory

Enhancement Of Resistive Switching Ratio Induced By Competing Interfacial Oxygen Diffusion In Tantalum Oxide Based Memories With Metal Nitride Electrode

Epitaxial Integration of Tetragonal Bifeo3 with Silicon for Nonvolatile Memory Applications

The Role of Nitridation of Nc-Si Dots for Improving Performance of Nc-Si Nonvolatile Memory

A Metal/al2o3/zro2/sio2/si (MAZOS) Structure for High-Performance Non-Volatile Memory Application

Effect Of Control Oxide On The Performance Of Nanocrystalline Silicon Based Double-Barrier Floating Gate Memory Structure

Improvement of Reliability Characteristics of Tio2-Based Resistive Switching Memory Device with an Inserted Zno Layer

Impact of the Interfaces in the Charge Trap Layer on the Storage Characteristics of ZrO2/Al2O3 Nanolaminate-Based Charge Trap Flash Memory Cells

Endurance improvement technology with nitrogen implanted in the interface of WSiOx resistance switching device