Abstract:By solving the problem of very long test time on reliability qualification for Light-emitting Diode (LED) products, the accelerated degradation test with a thermal overstress at a proper range is regarded as a promising and effective approach. For a comprehensive survey of the application of step-stress accelerated degradation test (SSADT) in LEDs, the thermal, photometric, and colorimetric properties of two types of LED chip scale packages (CSPs), i.e., 4000 °K and 5000 °K samples each of which was driven by two different levels of currents (i.e., 120 mA and 350 mA, respectively), were investigated under an increasing temperature from 55 °C to 150 °C and a systemic study of driving current effect on the SSADT results were also reported in this paper. During SSADT, junction temperatures of the test samples have a positive relationship with their driving currents. However, the temperature-voltage curve, which represents the thermal resistance property of the test samples, does not show significant variance as long as the driving current is no more than the sample's rated current. But when the test sample is tested under an overdrive current, its temperature-voltage curve is observed as obviously shifted to the left when compared to that before SSADT. Similar overdrive current affected the degradation scenario is also found in the attenuation of Spectral Power Distributions (SPDs) of the test samples. As used in the reliability qualification, SSADT provides explicit scenes on color shift and correlated color temperature (CCT) depreciation of the test samples, but not on lumen maintenance depreciation. It is also proved that the varying rates of the color shift and CCT depreciation failures can be effectively accelerated with an increase of the driving current, for instance, from 120 mA to 350 mA. For these reasons, SSADT is considered as a suitable accelerated test method for qualifying these two failure modes of LED CSPs.

Junction temperature-forward voltage characterization of LEDs based accelerated degradation test

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Degradation mechanism beyond device self-heating in high power light-emitting diodes

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Characteristics of the Accelerated Aging White LEDs

Study on the Stability of the High‐brightness White LED

Degradation Behaviors of High Power Gan-Based Blue Light Emitting Diodes

Junction Temperature Measurement and Luminous Properties Research of High-Power LED

The Electroluminescence Spectra of InGaN/GaN Blue LEDs During Aging Ti Me

Photometric and Colorimetric Assessment of LED Chip Scale Packages by Using a Step-Stress Accelerated Degradation Test (SSADT) Method

COLOR AND SPECTRAL CHARACTERISTICS OF WHITE LIGHT EMITTING DIODES AND THEIR VARIATION DURING AGING

A New Non-Contact Method Based on Relative Radiation Intensity for Determining Junction Temperature of LEDs

Climatically Accelerated Material Processes Determining the Long-Term Reliability of Light-Emitting Diodes

Examining Degradation Mechanisms in Strain-Relaxed AlGaN-Based UV-C Light-Emitting Diodes Using Raman Spectroscopy

An Improvement on the Junction Temperature Measurement of Light-Emitting Diodes by Using the Peak Shift Method Compared with the Forward Voltage Method

Research on the Reliability of GaN-based Violet LED

Dependence of Reliability of GaN LEDs on Their Junction Temperatures and Ideal Factors

On-line Monitoring Flip LED Chip Performance Degradation and Failure Analysis

Study on Aging Properties of GaN LEDs Based on the Measurement of Nonradiative Recombination Defect Density

Study of Defect Density and Aging Properties of GaN LEDs

LED Junction Temperature Measurement: From Steady State to Transient State