Abstract:LEDs are temperature sensitive devices. Many other characteristics of LEDs strongly depend on their thermal characteristics. So accurate measurement for the junction temperature and thermal resistance of LEDs is important. The uncertainty analysis in these measurements, which is important for accurate measurements, is given in this paper. The standard evaluation method for measurement uncertainty in GUM is used. The junction temperature of an LED is measured by indirect measurement for its forward voltage under constant current. The uncertainty components are from the measurement for the initial junction temperature, the steady forward voltage, the initial forward voltage and the calibration of the voltage-temperature coefficient. The thermal resistance is calculated with the measured junction temperature and the thermal power. The uncertainty components are from the measurement for the junction temperature, input current and forward voltage. Analysis results show that the uncertainty of the junction temperature is the most dominant uncertainty contribution in the measurement for the thermal resistance. In the junction temperature measurement, the uncertainty in the calibration of the voltage-temperature coefficient contributes significantly. Thermal equilibrium and good thermal conducting condition should be obtained. These results give a better understanding and practice guide to an accurate measurement for the junction temperature and thermal resistance of LEDs.

Dependence of Reliability of GaN LEDs on Their Junction Temperatures and Ideal Factors

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Study on Aging Properties of GaN LEDs Based on the Measurement of Nonradiative Recombination Defect Density

Methods for Determining Junction Temperature of GaN-based White LEDs

Research on the Relationship Between Ideality Factor and Number of Units of Gan-Based High Voltage Light-Emitting Diode

Reliability Research of GaN-Based blue Semiconductor Lasers

Effects of Junction Temperature and Its Variations on the Performance of GaN‐based High Power Flip‐chip LEDs

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Enhanced high-temperature performance of GaN light-emitting diodes grown on silicon substrates

Accurate Measurement and Influence on Device Reliability of Defect Density of A Light-Emitting Diode

Research on the Current-voltage Characteristics of GaN-based High Power Flip-chip Blue LED

On the Temperature Dependence of Electron Leakage from the Active Region of Gainn/Gan Light-Emitting Diodes

Study of Defect Density and Aging Properties of GaN LEDs

Junction Temperature, Spectral Shift, and Efficiency in GaInN-based Blue and Green Light Emitting Diodes

Uncertainty Analysis in Measurement for Led Junction Temperature and Thermal Resistance

Limiting factors of GaN-on-GaN LED

High-temperature Performance of InGaN-based Amber Micro-Light-emitting Diodes Using an Epitaxial Tunnel Junction Contact

Research on the Reliability of GaN-based Violet LED

Temperature-Dependent Efficiency Droop Behaviors of Gan-Based Green Light-Emitting Diodes

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Study on Optical Properties and Internal Quantum Efficiency Measurement of GaN-based Green LEDs