Abstract:A method of measuring the precise temperature distribution of GaN-based light-emitting diodes (LEDs) by quantitative infrared micro-thermography is reported. To reduce the calibration error, the same measuring conditions were used for both calibration and thermal imaging; calibration was conducted on a highly emissive black-painted area on a dummy sapphire wafer loaded near the LED wafer on a thermoelectric cooler mount. We used infrared thermal radiation images of the black-painted area on the dummy wafer and an unbiased LED wafer at two different temperatures to determine the factors that degrade the accuracy of temperature measurement, i.e., the non-uniform response of the instrument, superimposed offset radiation, reflected radiation, and emissivity map of the LED surface. By correcting these factors from the measured infrared thermal radiation images of biased LEDs, we determined a precise absolute temperature image. Consequently, we could observe from where the local self-heat emerges and how it distributes on the emitting area of the LEDs. The experimental results demonstrated that highly localized self-heating and a remarkable temperature gradient, which are detrimental to LED performance and reliability, arise near the p-contact edge of the LED surface at high injection levels owing to the current crowding effect.

Methods for Determining Junction Temperature of GaN-based White LEDs

A New Non-Contact Method Based on Relative Radiation Intensity for Determining Junction Temperature of LEDs

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Thermal Influence of Phosphor to GaN-based White LEDs

Effects of Junction Temperature and Its Variations on the Performance of GaN‐based High Power Flip‐chip LEDs

Junction Temperature, Spectral Shift, and Efficiency in GaInN-based Blue and Green Light Emitting Diodes

Thermal Analysis and Design of High-Power LED Street Light

Dependence of Reliability of GaN LEDs on Their Junction Temperatures and Ideal Factors

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Thermal Design of GaN-based High-power LED Module

Junction Temperature Measurement and Luminous Properties Research of High-Power LED

Prediction of junction temperature of white LED based on central wavelength and relative parameter of chromaticity coordinates

High-temperature Performance of InGaN-based Amber Micro-Light-emitting Diodes Using an Epitaxial Tunnel Junction Contact

Fabrication and Luminescence Characteristics Studies of the High-power White LEDs with Low T_c and High R_a

Junction Temperature Measurements and Thermal Modeling of GaInN/GaN Quantum Well Light-Emitting Diodes

Comprehensive Thermal Characterization Using Ruby R Fluorescence Lines of Sapphire and Gane2-High Raman Mode from Raman Spectra in High-Power Flip-Chip Ingan/Gan Leds

Junction Temperature Analysis In Green Light Emitting Diode Dies On Sapphire And Gan Substrates

Measurement of LED Junction Temperature in Working Circuit

Improving Peak-Wavelength Method to Measure Junction Temperature by Dual-Wavelength Leds

Precise temperature mapping of GaN-based LEDs by quantitative infrared micro-thermography