Abstract:While junction temperature control is an indispensable part of having reliable solid-state lighting, there is no direct method to measure its quantity. Among various methods, temperature-sensitive optical parameter-based junction temperature measurement techniques have been used in practice. Researchers calibrate different spectral power distribution behaviors to a specific temperature and then use that to predict the junction temperature. White light in white LEDs is composed of blue chip emission and down-converted emission from photoluminescent particles, each with its own behavior at different temperatures. These two emissions can be combined in an unlimited number of ways to produce diverse white colors at different brightness levels. The shape of the spectral power distribution can, in essence, be compressed into a correlated color temperature (CCT). The intensity level of the spectral power distribution can be inferred from the luminous flux as it is the special weighted integration of the spectral power distribution. This paper demonstrates that knowing the color characteristics and power level provide enough information for possible regressor trainings to predict any white LED junction temperature. A database from manufacturer datasheets is utilized to develop four machine learning-based models, viz., k-Nearest Neighbor (KNN), Radius Near Neighbors (RNN), Random Forest (RF), and Extreme Gradient Booster (XGB). The models were used to predict the junction temperatures from a set of dynamic opto-thermal measurements. This study shows that machine learning algorithms can be employed as reliable novel prediction tools for junction temperature estimation, particularly where measuring equipment limitations exist, as in wafer-level probing or phosphor-coated chips.

Prediction of junction temperature of white LED based on central wavelength and relative parameter of chromaticity coordinates

Junction temperature and luminous flux prediction for white LED array based on electrical-photo-thermal modeling

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Spectrum measurement for LED-based spectrum-tunable source

Novel Measurement System and Analytical Method for White LED Phosphors

A New Non-Contact Method Based on Relative Radiation Intensity for Determining Junction Temperature of LEDs

Machine Learning to Predict Junction Temperature Based on Optical Characteristics in Solid-State Lighting Devices: A Test on WLEDs

Dynamic prediction of optical and chromatic performances for a light-emitting diode array based on a thermal-electrical-spectral model

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Measurement of LED Junction Temperature in Working Circuit

Methods for Determining Junction Temperature of GaN-based White LEDs

An Improvement on the Junction Temperature Measurement of Light-Emitting Diodes by Using the Peak Shift Method Compared with the Forward Voltage Method

LED Junction Temperature Measurement: From Steady State to Transient State

Junction Temperature Measurement of Light Emitting Diode by Electroluminescence

Spectral Optimization of White LED Based on Mesopic Luminance and Color Gamut Volume for Dim Lighting Conditions

Measurement model of circadian action factor of phosphor-converted white LEDs based on photometric, electrical, and thermal properties

Low blue light hazard for tunable white light emitting diode with high color fidelity and circadian performances

An Investigation on CCT and Ra Optimization for Trichromatic White LEDs Using a Dual-Weight-Coefficient-Based Algorithm

The Relationship between Junction Temperature and Color Parameters of LED and the Limit of Junction Temperature

Optimization of Trichromatic Color Temperature Tunable White Light LEDs