Abstract:In this paper, the first issue presented and analyzed by several experiments is the influence of the distance between phosphor layers in the dual-layer and triple-layer remote package on luminous flux and color rendering property. During the simulation, it was realized that it was possible to create a suitable distance to create higher quality white light-emitting diodes (WLEDs) by adjusting the distance between the phosphor layers. According to the study results, 0.1 mm is the most reasonable distance between two phosphor layers so that the performance of the multi-chip white light LED (MCW LED) can get the best optimal effect. Through a series of experiments, it has been proved that the efficiency of the two-layer structure gives optical properties higher than the three-layer structure related to distance. The highest achievable lumen output is 0.6 mm for the triple-layer structure and 0.1 mm for dual-layer structure. Meanwhile, the color rendering index changes insignificantly when the distance increases. The triple-layer package is not practical for high-power white LEDs due to the high cost and low conversion efficiency. The dual-layer remote phosphor package with a 0.1 mm phosphorus gap is the optimal structure of WLED in improving luminous efficiency and color rendering index. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.

Novel Measurement System and Analytical Method for White LED Phosphors

Characterization and Measurement of White LED Phosphors

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Realizing White LEDs with High Luminous Efficiency and High Color Rendering Index by Using Double Green Phosphors

Accurate Determination of External Photoluminescence Quantum Efficiency of Phosphor for White LED by Using Inner Standard Scattering Board

A Fluorescein-Centered Polymer As a Phosphor for Fabricating Pure White Light-Emitting Diodes

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

High-efficiency Technology of LED White Light Based on Phosphor Glass

Novel strategy to optimize luminance for phosphor-converted laser lighting

A Novel Narrow-Band Blue-Emitting Phosphor with High Efficiency and Thermal Stability for WLEDs and FEDs

Optical Model of Laminated Remote Phosphor Films and Its Application in White LED

Study on the LED's Total Flux Measurement System

Fabrication and Luminescence Characteristics Studies of the High-power White LEDs with Low T_c and High R_a

A novel Eu3+ activated Ca3Zn3Te2O12 tellurate red phosphor for white LEDs with high color stability and color purity

Development of a novel Eu2+ activated oxonitridosilicate cyan phosphor for enhancing the color quality of violet-chip-based white LED

Design efficient energy transfer Ca2Al2SiO7: Bi3+, Eu3+ phosphors by cationic substitution for full-spectrum W-LED lighting

High Efficiency Mn4+ Doped Sr2mgal22o36 Red Emitting Phosphor For White Led

A novel green‐emitting luminescent materials with broad‐band emission for high‐quality warm white LED indoor lighting

Highly Efficient Blue‐Emitting Phosphor via Charge Compensation Strategy and its Application for White LED Lighting

Selection of Remote Phosphor Led Packages for Improving Luminous Flux

Luminescence mechanism analysis on high power tunable color temperature Chip-on-Board white LED modules