Abstract:In recent years, Micro-light-emitting diode (Micro-LED) has attracted much attention in the display field, because it provides the possibility of high pixel density, etc. The implementation of high pixel density is accompanied by the reduction of size, during which the performance degradation caused by sidewall defects gradually increases. At the same time, the increase in power density and difficulty in heat dissipation caused by high pixel density can also lead to poor thermal management, resulting in an increase in junction temperature, thus affecting the display effect. In this paper, we prepared seven different sizes of Micro-LED and studied the influence of size and temperature effects on the optoelectronic properties. Smaller-sized Micro-LED could withstand higher current densities because it was not affected by the current crowding effect. However, it tends to have a larger series resistance (R-S) and a lower external quantum efficiency (EQE) due to sidewall defects created during etching. The luminance of the 100 mu m and 7 mu m Micro-LED was 340000 cd/m(2) (at 83 A/cm(2)) and 32000 cd/m(2) (at 773 A/cm(2)), respectively. The peak EQE of 100 mu m Micro-LED was 16.87 %. On this basis, the temperature-dependence of the optoelectronic properties of 10 mu m and 50 mu m Micro-LED were studied. The larger the size of Micro-LED, the better the operational stability it exhibited. From the room temperature (RT) rose to 100 degree celsius, the EQE of the 10 mu m and 50 mu m Micro-LED decreased by 16 % and 13.1 %, respectively. These experimental results provide important data for the design and preparation of Micro-LED of different sizes and for exploring the operational stability at high temperatures.

The Relationship between Junction Temperature and Color Parameters of LED and the Limit of Junction Temperature

Thermal Analysis and Design of High-Power LED Street Light

Junction Temperature Measurement and Luminous Properties Research of High-Power LED

A New Non-Contact Method Based on Relative Radiation Intensity for Determining Junction Temperature of LEDs

Junction temperature study during degradation process of high power light-emitting diodes

Thermal Performance of LED Filament in Flip-Chip Packaging Manufactured for Different Correlated Color Temperature

Study on LED array heat transfer under natural convection based on CFD

Junction temperature and reliability of high-power flip-chip light emitting diodes

Thermal characteristics: Gap of LED devices and LED's lighting application

INFLUENCE OF LED COLOR TEMPERATURE ON LUMINANCE OF THE INTERIOR TUNNEL ZONE

The Study on High-effect and Mechanism of Heat Dissipation of Tunnel LED

Thermal Management Analysis of LED Luminaire for Road Lighting

Experimental Study of Measuring LED's Temperatures Via Thermocouple

Junction Temperature Measurement of Light Emitting Diode by Electroluminescence

Measurement of LEDs' Temperature Characteristics

LED Junction Temperature Measurement: From Steady State to Transient State

An Improvement on the Junction Temperature Measurement of Light-Emitting Diodes by Using the Peak Shift Method Compared with the Forward Voltage Method

Thermal Management In Led Packaging And Applications

Size and Temperature Effects on Optoelectronic Properties of Micro-LED Arrays for Display Applications

Effects of LED Lighting Degradation and Junction Temperature Variation on the Performance of Visible Light Communication

An Engineering Method to Estimate the Junction Temperatures of Light-Emitting Diodes in Multiple LED Application