Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.

Discussion about problems in measuring photometric and colorimetric parameters of LED

Stray light errors in spectral colour measurement and two rejection methods

Measurement of Luminous Flux of Blue LEDs Using Spectral-Correction-Integral-Photometry Method

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Experimental Research On Distribution Of Led'S Light Intensity

Measurement of Led Spatial Intensity Distribution Using Imaging

Novel Measurement System and Analytical Method for White LED Phosphors

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Spectrum measurement for LED-based spectrum-tunable source

Measurement of LEDs' Temperature Characteristics

Study on Methodology of LED's Luminous Flux Measurement with Integrating Sphere

A novel technique for rapid measurement of LED spatial chromaticity and photometric distribution

A research of laboratory instrument for LED property measurement

A Design of LED Light Intensity Distribution Measuring Device and Fitting in Matlab

Research on the Measuring Accuracy of LED Street Light

THE IMPLEMENTATION AND ERROR ANALYSIS OF THE NOVEL DEVICE FOR LED'S TOTAL LUMINOUS FLUX MEASURING

Photobiological radiance measurement in leds ’ radiation safety assessment

Discussion on the Position of Light Emitting Diodes (LEDs) in the Total Flux Measurement with Integrating Sphere

The Application of Fiber Spectrometer in Luminous Flux Determination of LED