Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

Synchronistic Preparation of Fibre-Like Sic and Cubic-Zro2/Sic Composite from Zircon Via Carbothermal Reduction Process

Fabrication of ZrO2‐SiC Composites from Natural Zircon Ore by Carbothermal Reduction

Low-Cost Preparation of YSZ-SiC High-Temperature Composite from Zircon and Y2O3 by Carbothermal Reduction

Fabrication and Characterization of ZrO_2/SiC Composite Materials

Effects of CaO Additives on the Phase Evolution of ZrO2-SiC Composites from Zircon by Carbothermal Reduction

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Synthesis of Fiber-Like SiС by Carbothermal Reduction of Used Silica Bricks

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Preparation Of Al2o3-Sic Composite Powder From Kyanite Tailings Via Carbothermal Reduction Process

Effects of carbon coke additions on synthesis of ZrN-SiAlON from zircon and alumina by carbothermal reduction nitridation process

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods

In Situ Synthesis of Ultrafine Zrb2-Sic Composite Powders and the Pressureless Sintering Behaviors

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Synthesis of ZrN–Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitridation

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Synchronistic Preparation of Fibre-Like Sic and Cubic-Zro2/Sic Composite from Zircon Via Carbothermal Reduction Process

Fabrication of ZrO2‐SiC Composites from Natural Zircon Ore by Carbothermal Reduction

Low-Cost Preparation of YSZ-SiC High-Temperature Composite from Zircon and Y2O3 by Carbothermal Reduction

Fabrication and Characterization of ZrO_2/SiC Composite Materials

Effects of CaO Additives on the Phase Evolution of ZrO2-SiC Composites from Zircon by Carbothermal Reduction

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Synthesis of Fiber-Like SiС by Carbothermal Reduction of Used Silica Bricks

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B&lt;sub&gt;2&lt;/sub&gt;-Zr(Hf)C-SiC Composites

Preparation Of Al2o3-Sic Composite Powder From Kyanite Tailings Via Carbothermal Reduction Process

Effects of carbon coke additions on synthesis of ZrN-SiAlON from zircon and alumina by carbothermal reduction nitridation process

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods

In Situ Synthesis of Ultrafine Zrb2-Sic Composite Powders and the Pressureless Sintering Behaviors

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Synthesis of ZrN–Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitridation

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites