Abstract:ZrN–Si3N4 composite powders were synthesised from natural zircon and quartz via carbothermal reduction and nitridation reaction. The effects of various raw material compositions and heating temperatures on phase transformation and product morphologies under flowing nitrogen atmosphere were investigated by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The phase equilibrium relationships of the ZrO2–SiO2–C–N2 system at different heating temperatures were also investigated based on the thermodynamic analysis. Products with different phase compositions and morphologies were obtained at different conditions. The products were composed of ZrN, β-Si3N4 and a small amount of c-ZrO2 by carbothermal reduction and nitridation of zircon with less than 20wt.% quartz. With 30wt.% quartz, granular ZrN as well as columnar and acicular β-Si3N4 were detected in the products. With 40wt.% or 50wt.% quartz, the products consisted of ZrN, β-Si3N4, Si2N2O, c-ZrO2 and m-ZrO2. The optimum quartz content for synthesizing ZrN–Si3N4 composite powders was 30wt.%. At heating temperatures below 1600°C, the products were composed of ZrN, β-Si3N4, β-SiC, Si2N2O, m-ZrO2 and c-ZrO2.

Synthesis of ZrN–Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitridation

Influence of Reaction Temperature and Zircon Addition on Product from Quartz by Carbothermal Reduction and Nitridation

Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation

Synthesis of β-Si3N4 powder from quartz via carbothermal reduction nitridation

Synthesis of ZrN-sialon composites from zircon and alumina by carbothermal reduction-nitridation

Fabrication of ZrO2‐SiC Composites from Natural Zircon Ore by Carbothermal Reduction

Carbothermal/aluminothermic Reduction Nitridation Synthesis of ZrN–SiAlON Refractory Composites from Zircon and Bauxite: a Comparative Study of the Reduction Effect of Reducers

Influences of Carbon Contents on the Products of Carbothermal Reduction-nitriding of Natural Quartz

Effect of Temperature on the Phase Behaviors of Zircon by Carbothermal Reduction-Nitridation

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Effects of CaO Additives on the Phase Evolution of ZrO2-SiC Composites from Zircon by Carbothermal Reduction

Effects of carbon coke additions on synthesis of ZrN-SiAlON from zircon and alumina by carbothermal reduction nitridation process

Effects of ZrO 2 on the Nitridation Behavior and Mechanical Properties of Reaction-Bonded Si 3 N 4 /H-Bn Composite

Preparation of ZrN Nanopowders by Internal Gelation and Carbothermic Nitridation

Synthesis of Nanocrystalline Zirconium Nitride Powders by Reduction-Nitridation of Zirconium Oxide

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Effect of Alumina Contents on the Synthesis of ZrN-Sialon from Zircon

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

Eliminating formation of ZrN in Si3N4/ZrO2 (Y-TZP) composites

Synchronistic Preparation of Fibre-Like Sic and Cubic-Zro2/Sic Composite from Zircon Via Carbothermal Reduction Process