Abstract:The occurrence of skidding and overskidding behaviour is likely to scratch rolling element raceways and lead to a significant temperature rise and thermal deformation. The ball-cage interaction and cage whirling motion are likely to oscillate as this skidding is aggravated. To address the damage problems introduced by skidding behaviour, a kinematic-Hertzian contact thermal-elasto-hydrodynamic (KH-TEHD) model with a 5-layer loop structure is proposed. Various factors are considered in the model, including the dynamic beahviour of bearing components, quasi-static analysis on bearing load distribution and deformation of bearing components, and the miscellaneous forces (unbalanced force, collision tangential friction, drag force) acting on the ball and cage. Ball-raceway lubrication, lubricant temperature rise, thermal expansion of shaft and bearing housings, and hydrodynamic pressure acting between the cage surface and guide-ring surface are established in this paper. A 7307AC bearing experimental study under varying operating speeds, axial loads and two lubricating conditions is conducted to validate the accuracy and effectiveness of the KH-TEHD model. The superiority of the developed model is illustrated by comparison with previous models, and the results suggest that the thermal expansion and cage-guide ring hydrodynamic pressure cannot be ignored. After comparisons with literature results, it is found that the overskidding degree is approximately proportional to the square of the bearing size under the same level of operating speed. The maximum thermal deformation at the bearing raceway under starvation lubrication reaches 4 times the ball-raceway clearance. The cage simulation results indicate that the cage whirling oscillation amplitude increases with increasing operating speed and unbalanced mass and generally decreases with increasing axial load. The proposed model and discussion of the results are useful for mitigating the skidding degree under certain conditions and avoiding cage instability and wear.

Study on the Calculation Method of Ball Bearing Mechanical Characteristics Considering Elastohydrodynamic Lubrication with Spinning

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Coupling Study on Quasi-Static and Mixed Thermal Elastohydrodynamic Lubrication Behavior of Precision High-Speed Machine Spindle Bearing with Spinning

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

Investigation on the angular contact ball bearings under low speed and heavy load with coupled mixed lubrication and quasi‐dynamic analysis

Lubrication and stability analysis of nonlinear rotor-bearing system

Dynamic characteristics of rigid-elastic-liquid-coupled ball bearings considering elastohydrodynamic lubrication

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

Fatigue life analysis of spinning bearings for roller-guided bushing special machines considering creep-slip characteristic

Dynamic Model for Slippage of Angular Contact Ball Bearings Based on Euler Equation

Sliding behavior of high speed ball bearings based on improved nonlinear dynamic model

Elastohydrodynamic Lubrication Analysis of Tapered Roller Bearing Considering effect of free Ends

Dynamic characteristics analysis of an elliptical bearing-rotor coupled system

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Simulation of the load reduction process of high-speed angular contact ball bearing with coupling model of dynamics and thermo-elastohydrodynamic lubrication

A nonlinear dynamic model to predict skidding behavior of angular contact ball bearings

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

Skidding and Cage Whirling of Angular Contact Ball Bearings: Kinematic-hertzian Contact-Thermal-elasto-hydrodynamic Model with Thermal Expansion and Experimental Validation

Study on the Load-Carrying Capacity of Surface Textured Slipper Bearing of Axial Piston Pump

An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems