Abstract:Bearing preload has a great impact on the service performance of high-speed spindle, such as the temperature rise and stiffness. Because of the flatness error of spacer, the axial parallelism error of the spindle, the nonuniform heat distribution of ball bearing and the external loads, the outer ring of the bearing is often subjected to nonuniform distributed loads, which will result in the misalignment between outer ring and spindle. In such conditions, traditional uniform preload method may not meet the requirements for bearing temperature rise and spindle rotation accuracy. In this paper, a nonuniform preload is presented which not only includes the preload magnitude in traditional way, but also involves the preload distribution nonuniformly. Firstly, an equivalent transformation for nonuniform preload is built to simplify the nonuniform preload acting on the outer ring. Then based on the Hertz contact theory and ball bearing geometry theory, a five degrees of freedom quasi-static model of ball bearing under nonuniform preload is established. On the basis of this model, internal load and other contact parameters in bearing are calculated and the heat mechanism of ball bearing is analyzed. Finally, according to the heat generation model under nonuniform preload which include both preload magnitude and distribution, effects of both uniform and nonuniform preload on bearing heat and its distribution are investigated and compared, and the contact forces in bearing are then analyzed. The results show that compared with uniform preload, proper nonuniform preload could effectively improve the contact status between balls and rings, decrease the heat generation rate, and reduce the excessive local heat in ball bearing under practical working conditions.

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Dynamic modeling and vibration response analysis of high speed motorized spindle

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Stiffness characteristics and experimental study of angular contact ball bearings considering the influence of rotational speed

Thermal effect modeling of axial static stiffness of motorized spindle unit

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Nonlinear dynamic analysis of CNC lathe spindle-bearing system considering thermal effect

Analysis of the Dynamic Characteristics of the Ball Bearing-rotor System in High-speed Electric Spindles

Modeling of the motorized spindle temperature field considering the thermos-mechanical coupling on constant pressure preloaded bearings

A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

A comprehensive misalignment-rub-impact nonlinear dynamic spindle model considering contact angle and fit clearance under EHL

Rotation Accuracy Analysis of Spindle under Variable Preload

Uneven Heat Generation and Thermal Performance of Spindle Bearings

Modelling and testing of the dynamic support stiffness of assembled bearings in motorized spindles

Radial Load Analysis of Matched Angular Contact Ball Bearings in Bearing-Rotor System

Study on Rotor-Bearing Dynamic Performance of a Novel Motorized Spindle Supported by Water-Lubricated Hydrodynamic Spiral Grooved Bearings

Heat Analysis of Ball Bearing under Nonuniform Preload Based on Five Degrees of Freedom Quasi-Static Model

Simulation on thermal characteristics of high-speed motorized spindle

Transient thermal properties investigation for precision bearing-spindle system considering fixed-position preload and lubricant viscosity-temperature effect