Abstract:PurposeElastic Ring Squeeze Film Damper (ERSFD) is normally incorporated into high-speed ball bearings to attenuate the vibration amplitude of the rotor system in aero-engines. At high rotor speeds, the bearing introduces considerable nonlinear excitation to the journal, causing it to exhibit distinct dynamic properties. As well, the deformation of the elastic ring in the ERSFD model significantly influences the hydrodynamic reaction force on the journal. This paper develops a high-speed ball-bearing excited ERSFD model with the deformation of the elastic ring analytically formulated. The effects of rotor operating speed and squirrel cage stiffness on the transient and steady-state dynamics of the journal were examined.MethodsThe journal is modeled under the excitation of ball-outer raceway interaction rather than rotor unbalance force, emphasizing heavy thrust-applied load. Ball-outer raceway interaction is calculated using a modified quasi-static model. Elastic ring deformation is derived analytically through a thin-walled ring and the oil film pressure is governed by the generalized Reynolds equation. Runge–Kutta approach was used to numerically integrate the differential equations of motion, and the journal center orbit and vibration acceleration were experimentally measured.ResultsThe results show that as the squirrel cage stiffness increases by 1.23 times from 0.6855, the eccentricity and transmissibility for the ERSFD with bearings are increased by a factor of 1.8 and 3, respectively. Correspondingly, the values for the ERSFD without bearings are increased by a factor of 1.7 and 2.7. As the rotor operating speed increases by 1.75 times from 8000 r min−1, the eccentricity and transmissibility for the ERSFD with bearings are decreased by 28.6% and 54.6%, respectively; for the ERSFD without bearings, the eccentricity remains unchanged and the transmissibility is decreased by 26.2%.ConclusionIt was concluded that when the journal works at a steady state an increase in squirrel cage stiffness disadvantages attenuation in bearing excitation; adequately high rotor operating speeds benefit journal dynamics when bearing excitation is considered in ERSFD. At transient state, lower squirrel cage stiffness and higher rotor operating speed allow the journal to behave in stable periodic motion for the ERSFD with bearing excitation; however, for the ERSFD without bearing excitation, lower squirrel cage stiffness fails to make the journal whirl periodically, and the rotor operating speed has little effect on the transient dynamics of the journal.

Dynamic characteristics of rigid-elastic-liquid-coupled ball bearings considering elastohydrodynamic lubrication

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Dynamic characteristics of elastic ring squeeze film damper coupled high-speed ball bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Dynamic Characteristics of Elastic Ring Squeeze Film Damper Oscillated by Bearing Contact Force

Fluid–structure interaction analysis of the influences of structural parameters on the dynamic properties of aerostatic journal bearing

Dynamic characteristics analysis of an elliptical bearing-rotor coupled system

Coupling Study on Quasi-Static and Mixed Thermal Elastohydrodynamic Lubrication Behavior of Precision High-Speed Machine Spindle Bearing with Spinning

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Nonlinear dynamic model of ball bearings with elastohydrodynamic lubrication and cage whirl motion, influences of structural sizes, and materials of cage

A nonlinear dynamic approach for analyzing dynamic stiffness of ball bearings at different raceway diameters and guiding clearances

Analysis of lubrication characteristics of dynamic-static pressure hybrid thrust bearing considering key factors under eccentric loads

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads

Study on Rotor-Bearing Dynamic Performance of a Novel Motorized Spindle Supported by Water-Lubricated Hydrodynamic Spiral Grooved Bearings

Dynamic modeling and simulation of a flexible-rotor ball bearing system

Analysis of the Dynamic Characteristics of the Ball Bearing-rotor System in High-speed Electric Spindles

Dynamic behaviors of angular contact ball bearings based on nonlinear dynamic model with flexible ring and cage motion whirl

Investigation on the angular contact ball bearings under low speed and heavy load with coupled mixed lubrication and quasi‐dynamic analysis