Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Study of grease lubricated journal bearing with partial surface texture

Thermal Non-Newtonian EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Elastohydrodynamic Lubrication Analysis on Line Contact Lubricated with Grease

Coupling Study on Quasi-Static and Mixed Thermal Elastohydrodynamic Lubrication Behavior of Precision High-Speed Machine Spindle Bearing with Spinning

Thermo-mechanical analysis of angular contact ball bearing

Thermo-Elasto-Hydrodynamic Characteristics Analysis of Journal Microbearing Lubricated with Rarefied Gas

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Study on the subsurface characteristics of textured surfaces under EHL condition

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

Effect of thermo-elastic deformation on lubricated point contacts

Thermo-elastohydrodynamic Lubrication Analysis on Multi-tilting-pad Journal Bearing

Prediction of bleeding behavior and film thickness evolution in grease lubricated rolling contacts

Research on the influencing factors of thermal characteristics of high-speed grease lubricated angular contact ball bearing

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Tribological and dynamic performance analysis of rolling bearings with varied surface textures operating under lubricant contamination