Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

Study of grease lubricated journal bearing with partial surface texture

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Experimental investigation for vibration reduction of surface-textured journal bearings

CFD analysis of load capacity of journal bearing with surface texture

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Numerical and Experimental Study of a Sector-Shaped Surface Texture in Friction Reduction

Effect of texture shapes and additives in lubricants on the dynamic characteristics of the hydrodynamic journal bearing

Effect of Micro-texture on Cavitation Distribution of Journal Bearing Friction Pair

Study on the subsurface characteristics of textured surfaces under EHL condition

Optimal design of surface texture in meso scale air journal bearing

Effect of surface square textures on the physical field of static and dynamic pressure thrust bearings and multi-objective optimization

The influences of lubricant groove shape on the tribological properties of journal bearing under the grease lubrication conditions

Effect of lubricant inertia on textured journal bearing implementing mass conserving (JFO) boundary conditions

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

Numerical and experimental investigation of textured journal bearings for friction reduction

An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration

Numerical analysis of lubrication properties on a bio-inspired parabolic textured surface

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

Experimental Investigation on Effects of Surface Texturing on Lubrication of Initial Line Contacts

Study on the wear performance of 304 stainless steel aerospace joint bearings