Abstract:Reducing frictional losses in response to the energy agenda will require use of less viscous lubricants causing hydrodynamically-lubricated bearings to operate with thinner films leading to "mixed lubrication" conditions in which a degree of direct interaction occurs between surfaces protected only by boundary tribofilms. The paper considers the consequences of thinner films and mixed lubrication for concentrated contacts such as those occurring between the teeth of power transmission gears and in rolling element bearings. Surface fatigue in gears remains a serious problem in demanding applications, and its solution will become more pressing with the tendency towards thinner oils. The particular form of failure examined here is micropitting, which is identified as a fatigue phenomenon occurring at the scale of the surface roughness asperities. It has emerged recently as a systemic difficulty in the operation of large scale wind turbines where it occurs in both power transmission gears and their support bearings. Predictive physical modelling of these contacts requires a transient mixed lubrication analysis for conditions in which the predicted lubricant film thickness is of the same order or significantly less than the height of surface roughness features. Numerical solvers have therefore been developed which are able to deal with situations in which transient solid contacts occur between surface asperity features under realistic engineering conditions. Results of the analysis, which reveal the detailed time-varying behaviour of pressure and film clearance, have been used to predict fatigue and damage accumulation at the scale of surface asperity features with the aim of improving understanding of the micropitting phenomenon. The possible consequences on fatigue of residual stress fields resulting from plastic deformation of surface asperities is also considered.

Prediction of bleeding behavior and film thickness evolution in grease lubricated rolling contacts

Prediction of film thickness in starved EHL point contacts using two-phase flow CFD model

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

Grease Lubrication: Formulation Effects on Tribological Performance

Film-Forming Characteristics of Grease in Point Contact under Swaying Motions

Film Thickness in Grease-Lubricated Deep Groove Ball Bearings—A Master Curve

Film Thickness Decay and Replenishment in Point Contact Lubricated with Different Greases: A Study into Oil Bleeding and the Evolution of Lubricant Reservoir

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

Modeling of Partially Wetting Liquid Film Using an Enhanced Thin Film Model for Aero-Engine Bearing Chamber Applications

Predictive modelling of fatigue failure in concentrated lubricated contacts

Prediction of oil-film thickness and shape in elliptical point contacts under combined rolling and sliding motion

Predicting Film Parameter and Friction Coefficient for Helical Gears Considering Surface Roughness and Load Variation

Vibrations and film thickness in grease-lubricated deep groove ball bearings

A Statistical Prediction of Electrical Discharge Initiation and Semi-Analytical Transient Mixed Lubrication Model of a Rolling Element

The Film Behaviors of Grease in Point Contact During Microoscillation

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

Effects of Slide/Roll Ratio on the Behaviours of Grease Reservoir and Film Thickness of Point Contact

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

Study on electric erosion in grease lubrication using optical interference method

Composite thermal oil film lubrication model for hybrid journal bearings

Thickener Behaviour in Rolling Elastohydrodynamic Lubrication Contacts