Abstract:In this article, we focus on utilising electrical impedance spectroscopy (EIS) for the assessment of global and contact impedances in roller bearings. Our primary objective is to establish a quantitative prediction of lubricant film thickness in elasto-hydrodynamic lubrication (EHL) and investigate the impedance transition from ohmic to capacitive behaviour as the system shifts from boundary lubrication to EHL. To achieve this, we conduct measurements of electrical impedance, bearing and oil temperature, and frictional torque in a cylindrical roller thrust bearing (CRTB) subjected to pure axial loading across various rotational speeds and supply oil temperatures. The measured impedance data is analysed and translated into a quantitative measure of lubricant film thickness within the contacts using the impedance-based and capacitance-based methods. For EHL, we observe that the measured capacitance of the EHL contact deviates from the theoretical value based on a Hertzian contact shape by a factor ranging from 3 to 11, depending on rotational speed, load, and temperature. The translation of complex impedance values to film thickness, employing the impedance and capacitance method, is then compared with the analytically estimated film thickness using the Moes correlation, corrected for inlet shear heating effects. This comparison demonstrates a robust agreement within 2% for EHL film thickness measurement. Monitoring the bearing resistance and capacitance via EIS across rotational speeds clearly shows the transition from boundary to mixed lubrication as well as the transition from mixed lubrication to EHL. Finally, we have observed that monitoring the electrical impedance appears to have the potential to perform the run-in of bearings in a controlled way.

Prediction of film thickness in starved EHL point contacts using two-phase flow CFD model

Prediction of bleeding behavior and film thickness evolution in grease lubricated rolling contacts

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

Prediction of oil-film thickness and shape in elliptical point contacts under combined rolling and sliding motion

Predicting Fatigue Life for Finite Line Contact under Starved Elastohydrodynamic Lubrication Condition

Predicting EHL film thickness parameters by machine learning approaches

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

EHL Film Thickness Limitation Theory Under a Limiting Shear Stress

Modeling of Partially Wetting Liquid Film Using an Enhanced Thin Film Model for Aero-Engine Bearing Chamber Applications

Thermal elastohydrodynamic lubrication analysis of helical gear pair under starved lubrication condition

Film Thickness Decay and Replenishment in Point Contact Lubricated with Different Greases: A Study into Oil Bleeding and the Evolution of Lubricant Reservoir

Simulation Sudden Oil Supply in Starved High-Speed Angular Contact Ball Bearing

Lubrication Prediction of Sphere‐Gradient Coated Half Space Interfaces

Electrical Impedance Spectroscopy for Precise Film Thickness Assessment in Line Contacts

Starvation and Reflow of Point Contact Lubricated with Greases of Different Chemical Formulation

A computer model for sliding friction in lubricated-point contacts

Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts

Qualitative Analysis of Film Thickness in Rolling EHD Contact by Fluorescence Technique