Abstract:Abstract Finite line contacts in rolling element bearings are usually under the regime of elastohydrodynamic lubrication (EHL). To obtain deeper insights into bearing performance, it is necessary to directly couple EHL contact models into bearing models. However, the existing EHL contact models are either too time-consuming to be employed in the bearing model or too simplified to consider tilting contact behaviors and actual roller profiles. A fast calculation approach for EHL finite line contacts is proposed by combining the empirical film thickness formulas that have been developed for decades and an improved slicing technique which considers the coupling behaviors between slices. The proposed approach can not only predict the contact stiffness (normal contact stiffness and tilting contact stiffness) and contact states (contact pressure and film thickness) accurately, but also is universal for different profiled contacts and material properties. The proposed approach costs only a few milliseconds for a single load case, which enables it to be directly employed in bearing models. Besides, the proposed approach is more of a framework, the use of which can be extended by involving different film thickness formulas and correction factors to consider complicated EHL behaviors such as thermal effects, shear thinning effects, surface roughness and lubricant starvation and so on.

Thermal Non-Newtonian EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Elastohydrodynamic Lubrication Analysis of Tapered Roller Bearing Considering effect of free Ends

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Thermo-mechanical analysis of angular contact ball bearing

Influence of Thermal and Elastic Deformations on Connecting-Rod Big End Bearing Lubrication Under Dynamic Loading

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Comparative analysis of angular contact bearing stiffness calculated by Hertz contact and thermo-elastohydrodynamic lubrication

Combined Thermal and Wear Analysis of Linear Rolling Guide Subjected to Rigid–Flexible Coupling Motion Stage

Analysis on Contact of Needle Roller Bearings

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Experimental and Theoretical Study on Forming Film Properties of Hollow Cylindrical Rollers

Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description

Investigation on the angular contact ball bearings under low speed and heavy load with coupled mixed lubrication and quasi‐dynamic analysis

Dynamic characteristics analysis of an elliptical bearing-rotor coupled system

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

A Thermohydrodynamic Analysis of Dynamic Coefficients of a Elliptical Journal Bearing Using One-Dimensional Model