Abstract:Purpose Inspired by the high-friction performance of the soft toe pads of tree frogs, this study aims to investigate the effect of elastic deformation on the lubrication properties of squeezing films inside soft tribocontacts with microstructured surface under wet conditions. Design/methodology/approach A one-dimensional hydrodynamic extrusion model was used to study the film lubrication characteristics of conformal contact. The lubrication characteristics of the extruded film, including load-carrying capacity, liquid flow and surface elastic deformation, were obtained through the simultaneously iterative solution of the fluid-governing and deformation equations. Findings The results show that the hydrodynamic pressure is approximating parabolically and symmetrically distributed in the contact area, and the peak value appears in the center of the extrusion surface. Elastic deformation increases the thickness of the liquid film, weakens the bearing capacity and homogenizes the liquid flow rate of inside soft friction contact. The magnitude of this effect greatly increases as the initial liquid film thickness decreases. Moreover, the elastic deformation directly affects the average film thickness of the extrusion contact. Narrow and shallow microchannels are found to result in a more prominent elastic deformation on the microstructured soft surface. Originality/value These results present a design for soft tribocontacts suitable for submerged or wet environments involving high friction, such as wiper blades, in situ flexible electrons and underwater robots. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0049/

Effect of thermo-elastic deformation on lubricated point contacts

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Effect of elastic deformation on squeezing film lubrication properties of soft tribocontacts with microstructured surface

A computer model for sliding friction in lubricated-point contacts

Visco-elastohydrodynamic Lubrication and Wear Model Amended by Deformation Velocity

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Thermomechanical modeling and transient analysis of sliding contacts between an elastic–plastic asperity and a rigid isothermal flat

Thermal-structure interactions on the nonlinear behavior of the heavy-load mechanical press with multiple clearance-induced joints

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Computer model of mixed lubrication in point contacts

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Prediction of Sliding Friction Force of Rough Surfaces in Lubricated Point Contacts

Modeling of fully coupled thermo-elastic sliding contact of coated systems

Calculation of Temperature Fields of Bodies in Sliding Contact Without Lubrication

Lubrication Of Nonconformal Contacts

Effects of Pad Face Thermal Distortion on Thermal Hydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact