Abstract:To improve the precision and homogeneity for mass-production of HFCVD diamond coated milling tools, the simulation of substrate temperature field generated by the HFCVD setup was conducted, adopting a 3D simulation model well in accordance with the actual equipment. Firstly, the deviation of the simulation model is assessed by comparing the simulated temperature and measured temperature based on a validation test. The comprehensive influences of various critical setup parameters on the fabrication of diamond coatings are illustrated systematically according to the Taguchi simulation scheme (L16, five factors and four levels), including the filament diameter d, the filament temperature Tf, the separation between two adjacent filaments D, the filament height H, and the material of sample holder M, in order to obtain an optimal HFCVD setup. The results indicate that filament diameter d and the separation between two adjacent filaments D can effectively contribute to adjusting the average temperature; the distance between filaments and tool tips H, and the material of sample holder M exhibit remarkable effects on the temperature uniformity; the filament temperature Tf shows obvious influences on both the average temperature and the temperature uniformity. Furthermore, the optimal HFCVD setup has been proposed, based on which a more uniform temperature field around all the tool tips can be acquired, contributing to the mass-production of high-quality and high-precision diamond coated milling tools. Afterwards, the mass-production experiments of depositing MCD and NCD diamond coatings on WC-6% Co milling tools were conducted in the actual HFCVD reactor, and tool-tip temperature were measured, revealing that the optimal setup can produce an extremely uniform temperature field. Moreover, the characterizations and cutting performances of MCD and NCD diamond coatings deposited on milling tools were evaluated, indicating that high-quality and high-precision diamond coatings with quite satisfactory homogeneity of thickness, surface and cross-sectional morphologies, chemical compositions and phases can be acquired during mass-production of diamond coated milling tools on the base of the optimal HFCVD setup.

Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface

SIMULATION OPTIMIZATION OF THE HEAT TRANSFER CONDITIONS IN HFCVD DIAMOND FILM GROWTH INSIDE HOLES

Simulation and experimental studies on substrate temperature and gas density field in HFCVD diamond films growth on WC-Co drill tools

Simulation of Temperature Distribution in HFCVD Diamond Films Growth on WC-Co Drill Tools in Large Quantities

Simulation of Substrate Temperature Distribution in Diamond Films Growth on Cemented Carbide Inserts by Hot Filament Cvd

Simulation and Experimental Researches on the Substrate Temperature Distribution of the Large-Capacity HFCVD Setup for Mass-Production of Diamond Coated Milling Tools

Simulation and experimental research on substrate temperature distribution in HFCVD diamond film growth on seal s end surface

Simulation of Substrate Temperature Distribution in Diamond Films Growth on Silicon Wafer by Hot Filament CVD

SIMULATION-BASED OPTIMAL DESIGN OF HFCVD EQUIPMENT ADOPTED FOR MASS PRODUCTION OF DIAMOND FILMS ON INNER-HOLE SURFACES

Simulation of Temperature Field in the Growth of Diamond Crystals by Hot Filament CVD and Experimental Study

Simulation Optimization of Filament Parameters for Uniform Depositions of Diamond Films on Surfaces of Ultra-Large Circular Holes

Simulation of Temperature Field in the Deposition of Diamond by Hot Filament CVD

Simulation of Temperature Distribution in HFCVD Diamond Films Growth on the Multitudinous Micro End Mills

Effects of Deposition Parameters on HFCVD Diamond Films Growth on Inner Hole Surfaces of WC–Co Substrates

Development of HFCVD apparatus for synthesizing diamond films with low thermal budget

Simulation and Experimental Researches on HFCVD Diamond Film Growth on Small Inner-Hole Surface of Wire-Drawing Die with No Filament Through the Hole

Simulation of Temperature Distribution in HFCVD Diamond Films Growth on the End Surfaces of Seals

Simulation And Experimental Research Studies On Temperature Field For The Production Of Diamond-Coated Milling Tools By Hfcvd Device With Separated Worktables

Effect of Deposition Parameters on Micro- and Nano-Crystalline Diamond Films Growth on WC–Co Substrates by HFCVD

Numerical Simulation of the Substrate Temperature Field in a Hot\|filament CVD Reactor

Optimization on the Hfcvd Setup for the Mass-Production of Diamond-Coated Micro-Tools Based on the Fvm Temperature Simulation