Abstract:Chemical vapor deposition (CVD) diamond films have been widely applied as protective coatings on varieties of anti-frictional and wear-resistant components, owing to their excellent mechanical and tribological properties close to the natural diamond. In applications of some components, the inner hole surface will serve as the working surface that suffers severe frictional or erosive wear. It is difficult to realize uniform depositions of diamond films on surfaces of inner holes, especially ultra-large inner holes. Adopting a SiC compact die with an aperture of 4380 mm as an example, a novel filament arrangement with a certain number of filaments evenly distributed on a circle is designed, and specific effects of filament parameters, including the filament number, arrangement direction, filament temperature, filament diameter, circumradius and the downward translation, on the substrate temperature distribution are studied by computational fluid dynamics (CFD) simulations based on the finite volume method (FVM), adopting a modified computational model well consistent with the actual deposition environment. Corresponding temperature measurement experiments are also conducted to verify the rationality of the computational model. From the aspect of depositing uniform boron-doped micro-crystalline, undoped micro-crystalline and undoped fine-grained composite diamond (BDM-UMC-UFGCD) film on such the inner hole surface, filament parameters as mentioned above are accurately optimized and compensated by orthogonal simulations. Moreover, deposition experiments adopting compensated optimized parameters and some typical contrastive parameters are also accomplished for further verifying the rationality of the computational model and the correctness of the compensation coefficient 0.7 defined for the downward translation determined by simulations. More importantly, on the basis of more simulations and verification tests, a general filament arrangement model suitable for Phi 50-120 mm circular inner holes is determined, involving all above filament parameters that are functionally dependent on the diameter of the inner hole. (C) 2015 Elsevier B.V. All rights reserved.

Parameters Optimization of Laser Processing CVD Diamond Film Based on FEM Simulation

Thermal analysis of in-situ laser assisted diamond cutting of fused silica and process optimization

SIMULATION OPTIMIZATION OF THE HEAT TRANSFER CONDITIONS IN HFCVD DIAMOND FILM GROWTH INSIDE HOLES

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology

Research on the mechanism of micromachining of CVD diamond by femtosecond laser

Simulation Optimization of Filament Parameters for Uniform Depositions of Diamond Films on Surfaces of Ultra-Large Circular Holes

Surface modeling and component analysis of picosecond laser ablation of CVD diamond

Study of spray-mist-assisted laser processing of micro-structures on CVD diamond surface

Modeling of the temperature field in nanosecond pulsed laser ablation of single crystalline diamond

Analysis of Temperature Field for Laser Assisted Mechanical Dressing and Truing of Diamond Grinding Wheel

Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining

CVD Process for Improving Mechanical Properties of HFCVD Diamond-coated Thin Film Tools

Process Research on Micro-Machining Diamond Microgroove by Femtosecond Laser

Numerical Simulation of Temperature Characteristics and Graphitization Mechanism of Diamond in Laser Powder Bed Fusion

Systematic Orthogonal Experiments Investigation for Diamond-like Carbon Deposition by ECR-CVD Method

Optimization of tungsten carbide processing parameters for laser heating and ultrasonic vibration composite assisted cutting

Theoretical and Experimental Study on Machining Rectangular Microgroove of Diamond by Femtosecond Laser

Investigation on system design methodology and cutting force optimization in laser-assisted diamond machining of single-crystal silicon

SIMULATION-BASED OPTIMAL DESIGN OF HFCVD EQUIPMENT ADOPTED FOR MASS PRODUCTION OF DIAMOND FILMS ON INNER-HOLE SURFACES

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond