Abstract:Uniform gas distribution contributes greatly to output performance, operating reliability, and durability of fuel cell stacks, which still lacks detection means and remains a great challenge. In this study, a non-invasive and in -situ characterization method of gas distribution is originally presented, based on the dual-chamber model that describes the mathematical relationship among gas flow, hydrogen crossover, and hydrogen transfer in the cathode side during electrochemical testing (N-2/H-2). By means of micro-current excitation, the hydrogen crossover of every cell in a stack is synchronously identified and then the gas distribution can be decoupled. In a specially designed step-current test that aims for direct evidence, the voltage response characteristics to artifi-cially induced air starvation coincide perfectly with the identified gas distribution. Typically, as the current density steps up to 175 mA.cm(-2), the voltages of under-supplied cells, classified by the identified stoichiometric ratios of nearly-one and within 1.13-1.15, decline rapidly to around zero and abnormally to around only 0.5 V, respectively, while the sufficiently supplied cells remain normal. Based on the in-situ method, the artificially channel-choked fuel cell is precisely recognized, and different choke degrees can be distinguished. As identified at the corresponding current densities of 50, 100, and 500 mA.cm(-2) and the average stoichiometric ratio of two, the gas flow rate of a certain cell only reduces by 22.8 %, 20.2 %, and 13.7 %, respectively, even with all the cathodic channels choked. The significant role of convection in the mass transfer is experimentally confirmed in fuel cells, and correspondingly, the mass transfer indicators are available by this electrochemical means.

Effect of Gas Supply Method on the Performance of the Single-Chamber Sofc Micro-Stack and the Single Cells

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Investigations on Single Chamber Solid Oxide Fuel Cells: from Single Cell to Micro-Stack

Effect of the Cell Distance on the Cathode in Single Chamber SOFC Short Stack

Enhanced Performance of a Single-Chamber Solid Oxide Fuel Cell with Dual Gas Supply Method

Effects of the Single Chamber SOFC Stack Configuration on the Performance of the Single Cells

Effect of the Angle Between Gas Flow Direction and Electrode on Single-Chamber SOFC Stacks

Study of a Single‐Chamber Solid Oxide Fuel Cell Microstack with V‐Shaped Congener‐Electrode‐Facing Configuration

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

Effect of Flow Geometry on Anode-Supported Single Chamber Sofcs Arrayed As V-Shape

A Non-Sealed Solid Oxide Fuel Cell Micro-Stack with Two Gas Channels

Numerical Study on Effects of Structure Parameters and Operating Conditions on the Micro-Tubular SOFC Stack Performance

Effect of Stack Configurations on Single Chamber Solid Oxide Fuel Cell, Anode–cathode, Anode–anode, and Cathode–cathode Configuration

Experimental Study on Current Distribution in Parallel-Connected Solid Oxide Fuel Cell Strings

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Flow uniformity analysis and optimization of a 60-cell external manifold solid oxide cell stack with bottom-accesses

Structural design and optimization for a 20-cell solid oxide fuel cell stack based on flow uniformity and pressure drop

Anode-Versus Cathode-Supported Solid Oxide Fuel Cell: Effect of Cell Design on the Stack Performance

Analyzing and Optimizing Cathode Gas Distribution Uniformity in Proton Exchange Membrane Fuel Cell Stacks Based on Two-Phase Flow Network Model

Development Of Single-Chamber Solid Oxide Fuel Cells: Performance Optimization And Micro-Stack Designs