A Thermally Self-Sustained Micro Solid-Oxide Fuel-Cell Stack with High Power Density
Zongping Shao,Sossina M. Haile,Jeongmin Ahn,Paul D. Ronney,Zhongliang Zhan,Scott A. Barnett
DOI: https://doi.org/10.1038/nature03673
IF: 64.8
2005-01-01
Nature
Abstract:Solid oxide fuel cells are not suitable for powering small portable devices, mainly because if built small, they need heat input to keep them running. A new approach to fuel-cell design tackles that problem head on, resulting in the first thermally self-sustaining miniature solid-oxide fuel cell. In this cell, the heat is from the oxidation reaction at the anode. Good power densities are achieved, and as proof of principle, the cell has successfully driven an MP3 player. High energy efficiency and energy density, together with rapid refuelling capability, render fuel cells highly attractive for portable power generation1,2. Accordingly, polymer-electrolyte direct-methanol fuel cells are of increasing interest as possible alternatives to Li ion batteries3. However, such fuel cells face several design challenges and cannot operate with hydrocarbon fuels of higher energy density. Solid-oxide fuel cells (SOFCs) enable direct use of higher hydrocarbons4,5,6, but have not been seriously considered for portable applications because of thermal management difficulties at small scales, slow start-up and poor thermal cyclability. Here we demonstrate a thermally self-sustaining micro-SOFC stack with high power output and rapid start-up by using single chamber operation on propane fuel. The catalytic oxidation reactions supply sufficient thermal energy to maintain the fuel cells at 500–600 °C. A power output of ∼350 mW (at 1.0 V) was obtained from a device with a total cathode area of only 1.42 cm2.