Abstract:A newly developed flat-chip solid oxide fuel cell (FCSOFC) shows advantages for its improved tolerance towards fast start-up and thermal shock, which makes it suitable to serve as portable or backup power supplier. In this study, a three-dimensional electro-chemo-thermo coupled numerical model is developed to analyze the factors limiting the power output of FCSOFC. Experiments are also carried out to acquire the effective electrode properties and validate model accuracy. The simulation results indicate that a feasible modification strategy is to reduce the ohmic loss in the anode nonreactive region. Three potential designs of the current collection are therefore proposed, with varied current collection passages placed at the vertical side, upper surface, and internal of the anode, respectively. Since collecting current from vertical side has limited current-conduction cross section and placing current collector on anode-sitting surface reduces cell functional electrode area, the third design, i.e. enhancing current collection from internal anode is recommended. The effects of current collector size on cell performance are investigated based on simulation. A maximal average current density of 776.76 A m- 2 is ob-tained, increased by 17.4% compared with the original structure. The analysis also shows that for upper and internal collector designs, the cell performance has a nonmonotonic relationship with the collector size. The optimal anode current size is determined by the joint effects of various polarizations. The study shows that the proposed numerical model is effective to improve cell performance, providing insightful guidance for the design of FCSOFC.

Structural design and optimization for a 20-cell solid oxide fuel cell stack based on flow uniformity and pressure drop

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Numerical Modeling of Manifold Design and Flow Uniformity Analysis of an External Manifold Solid Oxide Fuel Cell Stack

Numerical Simulation of Flow Distribution for External Manifold Design in Solid Oxide Fuel Cell Stack

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Flow uniformity analysis and optimization of a 60-cell external manifold solid oxide cell stack with bottom-accesses

Flow Distribution Analyzing for the Solid Oxide Fuel Cell Short Stacks with Rectangular and Discrete Cylindrical Rib Configurations

Numerical Analysis of Flow in U-Type Solid Oxide Fuel Cell Stacks

Analyzing and Optimizing Cathode Gas Distribution Uniformity in Proton Exchange Membrane Fuel Cell Stacks Based on Two-Phase Flow Network Model

Optimization design and numerical simulation of external SOFC stack

A Key Geometric Parameter for the Flow Uniformity in Planar Solid Oxide Fuel Cell Stacks

Flow Distribution Analysis In The Sofc Stack Using Cfd Technique

A CFD‐based manifold design methodology for large‐scale PEM fuel cell stacks

A novel design of inlet/outlet header structure for improving flow uniformity and performance in planar solid oxide fuel cell

Optimization of Entrance Geometry and Analysis of Fluid Distribution in Manifold for High-Power Proton Exchange Membrane Fuel Cell Stacks

Anode-Versus Cathode-Supported Solid Oxide Fuel Cell: Effect of Cell Design on the Stack Performance

Numerical Investigation of Air Flow Characteristics for a Compact 5 × 10 Array Tubular Segmented-in-series Solid Oxide Fuel Cell Stack

Understanding performance difference in the scale-up of flat-chip solid oxide fuel cell: An experimental and numerical study

Optimization of Gas Distribution in DMFC Stacks Based on Experiments and CFD Simulations

Cfd Analysis of A Novel Modular Manifold with Multi-Stage Channels for Uniform Air Distribution in A Fuel Cell Stack