Geometry optimization and pressure analysis of a proton exchange membrane fuel cell stack

Wei-Hsin Chen,Zong-Lin Tsai,Min-Hsing Chang,Siming You,Pei-Chi Kuo
DOI: https://doi.org/10.1016/j.ijhydene.2021.01.222
IF: 7.2
2021-05-01
International Journal of Hydrogen Energy
Abstract:For proton exchange membrane fuel cells (PEMFCs), the distribution of reactant streams in the reactor is critical to their efficiency. This study aims to investigate the optimal design of the inlet/outlet flow channel in the fuel cell stack with different geometric dimensions of the tube and intermediate zones (IZ). The tube-to-IZ length ratio, the IZ width, and the tube diameter are adjusted to optimize the geometric dimensions for the highest pressure uniformity. Four different methods, including the Taguchi method, analysis of variance (ANOVA), neural network (NN), and multiple adaptive regression splines (MARS), are used in the analyses. The results indicate the tube diameter is the most impactive one among the three factors to improve the pressure uniformity. The analysis suggests that the optimal geometric design is the tube-to-IZ length ratio of 9, the IZ width of 14 mm, and the tube diameter of 9 mm with the pressure uniformity of 0.529. The relative errors of the predicted pressure uniformity values by NN and MARS under the optimal design are 1.62% and 3.89%, respectively. This reveals that NN and MARS can accurately predict the pressure uniformity, and are promising tools for the design of PEMFCs.
energy & fuels,electrochemistry,chemistry, physical
What problem does this paper attempt to address?
### Problems the Paper Attempts to Solve This paper aims to study the optimal geometric design of the inlet/outlet flow channels in a Proton Exchange Membrane Fuel Cell (PEMFC) stack. Specifically, the authors focus on the effects of different pipe diameters, intermediate zone (IZ) widths, and their length ratios on pressure uniformity. By optimizing these geometric parameters, the pressure uniformity of the fuel cell stack can be improved, thereby enhancing its performance. ### Main Research Content 1. **Research Background**: - Proton Exchange Membrane Fuel Cell (PEMFC) is a device that generates electricity and heat through the electrochemical reaction of hydrogen and air. - The distribution of reactant flow fields in the fuel cell stack is crucial to its efficiency. - Optimizing the geometric design of the inlet/outlet flow channels can improve pressure uniformity, thereby enhancing the efficiency and lifespan of the fuel cell. 2. **Research Methods**: - Four methods were used for analysis: Taguchi method, Analysis of Variance (ANOVA), Neural Network (NN), and Multivariate Adaptive Regression Splines (MARS). - Geometric dimensions were optimized by adjusting the pipe diameter, intermediate zone width, and their length ratio. - Computational Fluid Dynamics (CFD) simulations were conducted to verify the impact of different geometric designs on pressure uniformity. 3. **Main Findings**: - Pipe diameter is the most important factor affecting pressure uniformity. - The optimal geometric design is: pipe diameter 9 mm, intermediate zone width 14 mm, and the length ratio of pipe diameter to intermediate zone is 9. - Neural Network (NN) and Multivariate Adaptive Regression Splines (MARS) performed excellently in predicting pressure uniformity, with relative errors of 1.62% and 3.89%, respectively. ### Conclusion By comprehensively using multiple analytical methods, the authors successfully determined the optimal geometric design of the inlet/outlet flow channels, significantly improving the pressure uniformity of the fuel cell stack. This research provides important references and guidance for enhancing the performance of fuel cell stacks.