Abstract:This study offers an efficient method for commercial-size proton exchange membrane fuel cell (PEMFC) stack performance evaluation to improve designing of fuel cell and maximize power density in PEMFC stack. The flow distribution in the manifold of the stack is critical to the energy conversion of the assembled unit cells in series due to the typical short-board effect. Most existing works studying on the flow distribution focus on small fuel cell stack and does not establish a clear relationship to performance, which are not able to thoroughly guide commercial-size PEMFC stack design and development. In the present study, an effective method combining computational fluid dynamics (CFD) model and empirical model is proposed to evaluate the performance of commercial-size stack considering air flow distribution in the manifold. Firstly, the air flow distribution in the manifold is predicted by a CFD model. A performance evaluation empirical model is developed by a series of experiments to evaluate the effects of flow maldistribution on the performance of PEMFC stack. Then, the predicted flow distribution and performance are respectively validated by a novel experimental setup. Finally, the effects of stack configuration, cell number, and current density on flow distribution and performance of PEMFC stacks are discussed. The results show that U-type configuration promotes more uniform voltage among unit cells than Z-type. The voltage unevenness of unit cells caused by flow maldistribution climbs dramatically as the cell number and current density increase. The methodology developed is beneficial to the energy management and the efficiency improvement of commercial-size PEMFC stack.

Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks

Manifold geometry optimization and flow distribution analysis in commercial-scale proton exchange membrane fuel cell stacks

Entrance Effects on the Flow Distribution in Manifold of Commercial-Size Proton Exchange Membrane Fuel Cell Stacks

Numerical Analysis on the Effects of Manifold Design on Flow Uniformity in a Large Proton Exchange Membrane Fuel Cell Stack

Improvement of air distribution consistency in large-scale proton exchange membrane fuel cell stack manifold

Optimization of Entrance Geometry and Analysis of Fluid Distribution in Manifold for High-Power Proton Exchange Membrane Fuel Cell Stacks

A CFD‐based manifold design methodology for large‐scale PEM fuel cell stacks

Optimization to the cathode gas field design of the proton exchange membrane fuel cell

Study on the Effects of Manifold Structure on the Gas Flow Distribution Uniformity of Anode of PEMFC Stack with 140-Cell

Analyzing and Optimizing Cathode Gas Distribution Uniformity in Proton Exchange Membrane Fuel Cell Stacks Based on Two-Phase Flow Network Model

Numerical Study of Porous Flow Field Designs for Proton Exchange Membrane Fuel Cells

Enhancing the Dynamic Performance of Proton Exchange Membrane Fuel Cells Through Two-Phase Flow Experimental Investigation

A Model Reduction Framework of Flow Maldistribution and Mitigation Strategy for Parallel Flow Field Based Polymer Exchange Membrane Fuel Cell

Stack-level Analysis of the Performance Variation in Air-Cooled PEMFC with Z-type Anode Manifold

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks

Manifold Design in a PEM Fuel Cell Stack to Improve Flow Distribution Uniformity

Effects of U-type and Z-type configurations on proton exchange membrane fuel cell stack performances considering non-uniform flow distribution phenomena

Effects of Flow Field on Thermal Management in Proton Exchange Membrane Fuel Cell Stacks: A Numerical Study

Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells

Improved flow field design for air-cooled proton exchange membrane fuel cells

Analytical and numerical investigation of flow distribution in PEMFC stacks