Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

All-scale investigation of a commercial proton exchange membrane fuel cell with partially narrow channels

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Enhancing the Dynamic Performance of Proton Exchange Membrane Fuel Cells Through Two-Phase Flow Experimental Investigation

Elucidating the automobile proton exchange membrane fuel cell of innovative double-cell structure by full-morphology simulation

Study on counter-flow mass transfer characteristics and performance optimization of commercial large-scale proton exchange membrane fuel cells

Optimization of channel dimensions and gas diffusion layer thickness based on mass transfer characteristics of proton exchange membrane fuel cell

Study on Transport Phenomena and Performance of Proton Exchange Membrane Fuel Cell with Radial Flow Fields

Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations

Optimization of channel structure for proton exchange membrane fuel cells based on a three‐dimensional two‐phase flow model

A novel 3D fine-mesh flow field design and performance analysis for proton exchange membrane fuel cells

Synergistic mass transfer and performance stability of a proton exchange membrane fuel cell with traveling wave flow channels

Optimization to the cathode gas field design of the proton exchange membrane fuel cell

Entrance Effects on the Flow Distribution in Manifold of Commercial-Size Proton Exchange Membrane Fuel Cell Stacks

Large-scale three-dimensional simulation of proton exchange membrane fuel cell considering detailed water transition mechanism

Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study

Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells

A Simulation Study on the Optimization of Flow Channel Pattern in High Temperature Proton Exchange Membrane Fuel Cell

Effect of flow channel shapes of proton exchange membrane fuel Cell on its performances

Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates