Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Multidimensional Modelling Of Polymer Electrolyte Fuel Cells Under A Current Density Boundary Condition

A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena

Large-scale Simulation of Polymer Electrolyte Fuel Cells by Parallel Computing

All-scale investigation of a commercial proton exchange membrane fuel cell with partially narrow channels

Improved flow field design for air-cooled proton exchange membrane fuel cells

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Effects of sub-distribution zone structure of bipolar plate on the mass transport of large-area proton exchange membrane fuel cells

Performance simulation and key parameters in-plane distribution analysis of a commercial-size PEMFC

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Analyzing Key Factors Influencing Water Transport in Open Air-Cooled PEM Fuel Cells

Flow field configuration design for a large-scale hydrogen polymer electrolyte membrane fuel cell

Optimization of channel structure for proton exchange membrane fuel cells based on a three‐dimensional two‐phase flow model

Multiple Effects of Non-Uniform Channel Width along the Cathode Flow Direction Based on a Single PEM Fuel Cell: an Experimental Investigation

A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate‐blocked interdigitated flow field designs

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks