Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Design and optimization of a novel composite bionic flow field structure using three-dimensional multiphase computational fluid dynamic method for proton exchange membrane fuel cell

Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

A novel 3D fine-mesh flow field design and performance analysis for proton exchange membrane fuel cells

Effects of Three-Dimensional Type Flow Fields on Mass Transfer and Performance of Proton Exchange Membrane Fuel Cell

Design of a Novel Nautilus Bionic Flow Field for Proton Exchange Membrane Fuel Cell by Analyzing Performance

Three-dimensional multiphase modeling of a proton exchange membrane electrolysis cell with a new interdigitated-jet hole flow field

Flow Field Design with 3D Geometry for Proton Exchange Membrane Fuel Cells

Flow flied inspired by sieve plate structure of plant leaf veins for proton exchange membrane fuel cells

Numerical Study of Porous Flow Field Designs for Proton Exchange Membrane Fuel Cells

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks

Numerical and experimental study on mass transfer and performance of proton exchange membrane fuel cell with a gradient 3D flow field

A novel intersectant flow field of metal bipolar plate for proton exchange membrane fuel cell

Constructing Region-Specific Porous Flow Field to Enhance Heat, Mass and Charge Transports in Proton Exchange Membrane Fuel Cells

Experimental and numerical study on improvement performance by wave parallel flow field in a proton exchange membrane fuel cell

Three-dimensional Modeling of Transport Phenomena in Proton Exchange Membrane Fuel Cell with Different Fluid Channel

A Novel Cathode Flow Field for PEMFC and Its Performance Analysis

All-scale investigation of a commercial proton exchange membrane fuel cell with partially narrow channels

Investigation of a Novel Cathode Flow Field of Proton Exchange Membrane Fuel Cell

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Design and performance optimization of a lattice-based radial flow field in proton exchange membrane fuel cells