Abstract:Addressing issues such as the mass transfer characteristics and internal performance consistency of the air cooling (AC) proton exchange membrane fuel cell (PEMFC) stack. A full-scale AC metal bipolar plate (BP) stack is proposed in this study, comprising inlet and outlet manifolds, membrane electrode assembly (MEA), reaction flow field (FF) and cooling FF. The coupling of electrochemical reactions and heat and mass transfer processes in the stack is simulated using a non-isothermal multiphase numerical model. The characterization of the mass spatial distribution in the stack is explored by varying the stoichiometric ratio of the cathode gas, the thermal boundary conditions, the flow direction of the reaction gas and the air inlet flow configuration . According to the simulation results, it is found that, initially, the simulation errors in the one-dimensional (1D) AC stack are large and mainly concentrated in the concentration loss region. Subsequently, the increased stoichiometric ratio enhances the proton exchange membrane (PEM) water content, improves the local current density by 1.6% and facilitates the discharge of waste heat from the stack. Furthermore, thermal boundary conditions significantly affect the distribution of temperature uniformity in the stack, with high local temperatures causing significant water vapor generation and resulting in oxygen dilution. The counter-flow of hydrogen and air enhances the electrochemical reaction rates in the cathode catalyst layer (CCL) by 0.353%, with the lowest liquid water content in the seventh cell, influenced by the uneven distribution of manifold flow. Finally, changing the position of the cathode manifold gas inlet indicates that the positive flow of the cathode and AC inlets from the Z axis reduces the maximum stack temperature and water vapor by 1.04% and 0.38% respectively. The CCLs in Case 4 have optimal oxygen distribution and output voltages of approximately 0.66 V per fuel cell (FC).

Experimental study of the thermal and power performances of a proton exchange membrane fuel cell stack affected by the coolant temperature

Study on the Heat and Mass Transfer Mechanisms of Liquid-Cooled PEMFC Stacks Based on Non-Isothermal Model

Investigation of non-uniform temperature distribution in air-cooled proton exchange membrane fuel cells with multizone temperature measurement

A single-phase, non-isothermal model for PEM fuel cells

Improved flow field design for air-cooled proton exchange membrane fuel cells

Experimental study on the thermal management of an open-cathode air-cooled proton exchange membrane fuel cell stack with ultra-thin metal bipolar plates

Experimental study on the dynamic response of voltage and temperature of an open-cathode air-cooled proton exchange membrane fuel cell

Experimental and numerical study on thermal management of air-cooled proton exchange membrane fuel cell stack with micro heat pipe arrays

Study on the influence of the hydrogen–oxygen stoichiometric ratio on the power performance improvement in a large-scale PEMFC stack

Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study

Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel

3D multi-phase simulation of metal bipolar plate proton exchange membrane fuel cell stack with cooling flow field

Full-scale three-dimensional simulation of air-cooled proton exchange membrane fuel cell stack: Temperature spatial variation and comprehensive validation

Performance enhancement of air-cooled PEMFC stack by employing tapered oblique fin channels: Experimental study of a full stack and numerical analysis of a typical single cell

Three-dimensional multi-phase numerical study for the effect of coolant flow field designs on water and thermal management for the large-scale PEMFCs

Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell

Thermal characteristics of an air‐cooled open‐cathode proton exchange membrane fuel cell stack via numerical investigation

Thermal management for an air coolant system of a proton exchange membrane fuel cell using heat distribution optimization

Numerical investigation of parameter distributions in high-temperature PEMFCs under various cooling surface temperature gradients

Full-scale three-dimensional simulation of air cooling metal bipolar plate proton exchange membrane fuel cell stack considering a non-isothermal multiphase model

Numerical study on heat transfer enhancement of a proton exchange membrane fuel cell with the dimpled cooling channel