Abstract:For anode-supported planar solid oxide fuel cells (SOFCs), the thick anode support layer (ASL) prevents the supply of fuel gas to the anode functional layer (AFL) where the electrochemical reactions take place. Shortage of the fuel gas at the active region results in concentration polarization. SOFC designs with porosity gradient anode may improve the cell performance. In order to investigate the effect of the porosity distributions on mass transfer characteristics of SOFC, a three dimensional half-cell model is developed based on the computational fluid dynamics (CFD) method. The numerical model solves continuity equation, conservation of momentum, multi-component mass transfer and electrochemical reaction. According to the numerical results, a SOFC design with a higher porosity gradient anode could effectively enhance mass transport of the fuel gas in the AFLs, which would lead to the reduction of polarization loss. It is also found that high porosity gradient among the anode layers could improve the H-2 concentration gradient in the porous anode, which is beneficial to facilitate diffusion of the fuel gas in the porous anode. Concentration overpotentials of the SOFC decrease with the increase of the porosity gradient, especially for the low inlet H-2 molar fraction. These findings indicate that the comprehensive performance of SOFC can be effectively improved by employing a high porosity gradient anode.

Effect of Flow Geometry on Anode-Supported Single Chamber Sofcs Arrayed As V-Shape

Effect of Stack Configurations on Single Chamber Solid Oxide Fuel Cell, Anode–cathode, Anode–anode, and Cathode–cathode Configuration

Effect of the Cell Distance on the Cathode in Single Chamber SOFC Short Stack

Anode-Versus Cathode-Supported Solid Oxide Fuel Cell: Effect of Cell Design on the Stack Performance

Flow uniformity analysis and optimization of a 60-cell external manifold solid oxide cell stack with bottom-accesses

Flow Distribution Analyzing for the Solid Oxide Fuel Cell Short Stacks with Rectangular and Discrete Cylindrical Rib Configurations

Experimental Investigation on the Anode Flow Field Design for an Air-Cooled Open-Cathode Proton Exchange Membrane Fuel Cell

Investigations on Single Chamber Solid Oxide Fuel Cells: from Single Cell to Micro-Stack

EFFECT OF GRADIENT ANODE ON MASS TRANSFER PERFORMANCE FOR ANODE-SUPPORTED PLANAR SOLID OXIDE FUEL CELLS

Investigation of Proton Exchange Membrane Fuel Cell Stack with Inversely Phased Wavy Flow Field Design

A Configuration for Improving the Performance of Coplanar Single-Chamber Solid Oxide Fuel Cell

Effects of Radial and Circumferential Flows on Power Density Improvements of Tubular Solid Oxide Fuel Cells

Characteristic simulation with various anode support thicknesses of membrane electrode assembly in SOFC

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

Structural design and optimization for a 20-cell solid oxide fuel cell stack based on flow uniformity and pressure drop

Study of a Single‐Chamber Solid Oxide Fuel Cell Microstack with V‐Shaped Congener‐Electrode‐Facing Configuration

Effect of the Angle Between Gas Flow Direction and Electrode on Single-Chamber SOFC Stacks

Analyzing and Optimizing Cathode Gas Distribution Uniformity in Proton Exchange Membrane Fuel Cell Stacks Based on Two-Phase Flow Network Model

Optimization of interconnect flow channels width in a planar solid oxide fuel cell

Effect of flow channel shapes of proton exchange membrane fuel Cell on its performances

The Effect of Anode Porosity on the Performance of Planar Electrode Supported Solid Oxide Fuel Cell